Skip to main content

Vocational Education & Training

AUR31116 Certificate III in Heavy Commercial Vehicle Mechanical Technology

2020

Didn't study in Australia? Switch to international student information

Not available to international students.
Download course pack
Overview

AUR31116

Casuarina

Estimated completion time: 3 year/s

The length of time to complete this qualification will depend on the location, study mode and selected units.
Refer to the relevant course information flyer for further information.

CDU Reference
Sector
Vocational Education & Training
Industry groups
AUTOMOTIVE
Occupation types
Motor Mechanic (General)

This qualification reflects the role of individuals who perform a broad range of tasks on a variety of heavy commercial vehicles in the automotive service and repair sector.

Also, this qualification may be suitable for Apprenticeships.

Career opportunities

Occupations relevant to this qualification in industry sectors such as Automotive Service and Repair include:

  • Heavy commercial vehicle technicians

Credit transfers & pathways

Skills recognition

Recognition of Prior Learning (RPL)
RPL is the acknowledgement of a person's skills and knowledge acquired through previous training, work or life experience, which may be used to grant status or credit in a subject regardless of how and where they were attained, including overseas.
This can include skills from:

  • Previous study excluding courses at another VET/TAFE institution, but including courses at school or college, through adult education classes or training programs at work;
  • Work experience (including both work that is paid and unpaid); and/or
  • Life experience (for example leisure pursuits or voluntary work).

RPL is a form of assessment. It is used to determine whether a person has acquired, through formal or informal learning, the skills and experience consistent with the stated competency standards that comprise a qualification. RPL is not time referenced, so there are no parameters on how or when the skills are acquired. However, the skills that have been acquired through life experience etc., must be current and must match the elements and performance criteria contained in the individual unit.

Students seeking RPL need to indicate this on their enrolment form at the time of enrolment.

For further information please refer to the Applicant's Guide to the Recognition of Prior Learning or contact VET RPL Enquiries on 1800 238 838 or email vet.rpl.enquiries@cdu.edu.au.

Credit Transfer
Charles Darwin University as a Registered Training Organisation recognises the Australian Qualifications Framework qualifications and Statement of Attainments issued by any other Australian Registered Training Organisation.

Students are encouraged to submit any requests for credit from previous studies at the time of enrolment, to ensure they are not enrolling in units they may not need to undertake.
In order to apply for exemption/credit transfer from units completed at another training organisation, you will need to complete an Application for Exemption Form available from any campus, centre, or team, or a copy of the form can be obtained from the web.

Your completed Application for Exemption form together with attached documentary evidence (certified copy of Qualification/Statement of Attainment) to support your request for exemption/credit transfer should be submitted directly to the University either in person or by mail. Requests without documentary evidence will not be processed and will be returned to students. There are no fees attached to Credit Transfers.

Pathways

VET to Higher Education Pathway Mapping for completed Awards in the same field or discipline.

Pathways from the qualification

AUR40216 Certificate IV in Automotive Mechanical Diagnosis

Entry requirements

To gain entry into AUR31116 - Certificate III in Heavy Commercial Vehicle Mechanical candidates require: A registered NT apprenticeship.

Students will need to wear work clothing suited to the automotive industry such as:

  • Workshop PPE
  • Steel cap boots
  • Safety glasses
  • Protective clothing

Students will need to demonstrate an appropriate level of language, literacy and numeracy skills and knowledge to undertake a course at this level.

  • This is a current, nationally accredited qualification from the AUR Automotive Retail, Service and Repair Training Package.

  • VET for Secondary Students (VSS)

    Select VSS for more detail about this program.

    Employability skills

    Employability Skills are embedded in the training and assessment of national training package qualifications. Information on the Employability Skills relevant to your qualification can be obtained by visiting this website and keying in the national code for the qualification: training.gov.au

    Location and study mode

    Delivery at all locations is subject to sufficient demand and resources.

    Locations: Casuarina

    Study Mode: On campus
    Some components of this qualification may be available in other modes of delivery and not all modes are available at all locations.

    Subject to demand other locations and modes may become available throughout the year.

Contact details

Automotive and Civil
Location: Casuarina Campus
Phone: 08 8946 7506
Fax: 08 8946 6433
Email: vet.autocivil@cdu.edu.au

Course structure

To achieve a CERTIFICATE III in HEAVY COMMERCIAL VEHICLE MECHANICAL TECHNOLOGY a total of THIRTY-SIX (36) units of competency must be completed comprising TWENTY-TWO (22) Core and FOURTEEN (14) Elective units as detailed in the packaging rules and listed below.

The total Nominal Hours for the sequence listed below is 1195.

Code Module/Unit of Competency Hours
CORE UNITS OF COMPETENCY
AURAEA002 Follow environmental and sustainability best practice in an automotive workplace 25
AURASA002 Follow safe working practices in an automotive workplace 20
AURETR012 Test and repair basic electrical circuits 40
AURETR022 Diagnose and repair vehicle dynamic control systems 70
AURETR024 Diagnose and repair compression ignition engine management systems 50
AURETR025 Test, charge and replace batteries and jump-start vehicles 15
AURETR029 Diagnose and repair charging systems 30
AURETR030 Diagnose and repair starting systems 30
AURHTB001 Diagnose and repair heavy vehicle air braking systems 50
AURHTD002 Diagnose and repair heavy commercial vehicle steering systems 40
AURHTD003 Diagnose and repair heavy commercial vehicle suspension systems 40
AURHTE002 Diagnose and repair heavy vehicle compression ignition engines 70
AURHTQ003 Diagnose and repair heavy vehicle drive shafts 30
AURHTZ001 Diagnose and repair heavy vehicle emission control systems 20
AURTTA004 Carry out servicing operations 20
AURTTA006 Inspect and service hydraulic systems 20
AURTTA018 Carry out diagnostic procedures 20
AURTTC003 Diagnose and repair cooling systems 20
AURTTF002 Inspect and service diesel fuel injection systems 20
AURTTF005 Diagnose and repair engine forced-induction systems 15
AURTTK002 Use and maintain tools and equipment in an automotive workplace 20
AURTTQ001 Inspect and service final drive assemblies 5
  Total nominal hours for core units 670
ELECTIVE UNITS OF COMPETENCY
AURHTX001 Diagnose and repair heavy vehicle manual transmissions 50
AURHTE001 Remove and install heavy vehicle engine assemblies 35
AURHTQ002 Diagnose and repair heavy commercial vehicle final drive assemblies 30
AURHTX004 Diagnose and repair heavy vehicle clutch systems 35
AURHTB002 Diagnose and repair heavy vehicle hydraulic and air over hydraulic braking systems 40
AURTTA013 Diagnose and repair hydraulic systems 60
AURTTK001 Use and maintain measuring equipment in an automotive workplace 15
AURHTF002 Diagnose and repair heavy vehicle diesel fuel injection systems 80
AURHTX003 Diagnose and repair heavy vehicle automatic transmissions 60
AURETR044 Diagnose and repair integrated engine and transmission management systems 50
AURTTC001 Inspect and service cooling systems 10
AURVTW018
Carry out oxyacetylene welding, thermal heating and cutting
30
AURVTW009 Carry out basic gas metal arc weldling (Unnamed) 20
AURVTW001 Carry out manual metal arc welding on conponents (Unnamed) 30
  Total nominal hours for elective units 525
  Total nominal hours for the qualification 1195

 

Course fees

Based on course nominal hours of between 1195 hours, approximate 2020 course fees will be:
VET Tuition Fees: $4,063.00
Domestic Full Fees: $23,302.50

The following Fees are applicable to this course:

Domestic Students

VET tuition fees

This course is subsidised by the NT Government.
2020: VET Tuition Fees for 2020 will be charged at $3.40 per nominal hour for subsidised training. More detailed Information about 2020 VET Tuition fees for eligible NT residents is available in the VET Student Guide.

Everything you need to know to get started

How to apply for domestic students

CDU VET has several pathways for you to apply.

 

Visit How to apply for CDU VET courses for more information.

 

Admission requirements for domestic students

Before applying, you may want to check if you meet the admission requirements for studying with CDU.

 

CDU has many pathways to study, so don't worry if you don't meet the admission requirements right now. There is a study pathway to get you started on your journey.

Not sure if you are a domestic or international student?

That's OK - it can be a little tricky to know the difference.

 

To help you out, we've put together a guide to answer any questions you might have.

Are you applying as an International Student?

Everything you need to get apply

How to apply for international students

Applications to CDU must be submitted online.

 

The process is simple, all you need is a valid email address to create your online account.

 

Once you have started the application you will have the option of saving your application and resuming it at a later date.

 

There is no application fee when you apply online.

Find a CDU agent partner

Applicants may seek further information about international education in Australia from the Australian Government Department of Education and Training or from our overseas / external representatives.

 

To help with the process, we've compile a list of authorised representatives.

Not sure if you are a domestic or international student?

That's OK - it can be a little tricky to know the difference.

 

To help you out, we've put together a guide to answer any questions you might have.

 

Things like the difference between domestic and international students or the difference between course types like VET and undergraduate.

Are you applying as a Domestic Student?