Skip to main content

Key details

Duration

3 year/s

This program is delivered over a period of 6 Semester or 3 years full-time. The length of time to complete this qualification will depend on the location, study mode and selected units.

* - Student Visa holders must study internally full time

Locations

Casuarina
Not available to international students.

Course code

AUR31216

Overview

This is a current, nationally accredited qualification due to be replaced during 2022. It is recommended that students contact CDU for current course details.

This qualification reflects the role of individuals who perform a broad range of tasks on a variety of heavy commercial vehicles in the automotive service and repair sector.

Career opportunities

Occupations relevant to this qualification in industry sectors such as Automotive Service and Repair include:
>Heavy commercial vehicle technicians

Credit transfers and advanced standing

Skill recognition

Recognition of Prior Learning (RPL)

RPL is the acknowledgement of a person's skills and knowledge acquired through previous training, work or life experience, which may be used to grant status or credit in a subject regardless of how and where they were attained, including overseas.

This can include skills from:

  • Previous study excluding courses at another VET/TAFE institution, but including courses at school or college, through adult education classes or training programs at work;
  • Work experience (including both work that is paid and unpaid); and/or
  • Life experience (for example leisure pursuits or voluntary work).

RPL is a form of assessment. It is used to determine whether a person has acquired, through formal or informal learning, the skills and experience consistent with the stated competency standards that comprise a qualification. RPL is not time referenced, so there are no parameters on how or when the skills are acquired. However, the skills that have been acquired through life experience etc., must be current and must match the elements and performance criteria contained in the individual unit.

Students seeking RPL need to indicate this on their enrolment form at the time of enrolment.

For further information please refer to the Applicant's Guide to the Recognition of Prior Learning or contact Student Central on 1800 061 963 (free call) or email Student.Central@cdu.edu.au.

Credit Transfer

Charles Darwin University as a Registered Training Organisation recognises the Australian Qualifications Framework qualifications and Statement of Attainments issued by any other Australian Registered Training Organisation.

Students are encouraged to submit any requests for credit from previous studies at the time of enrolment, to ensure they are not enrolling in units they may not need to undertake.

In order to apply for exemption/credit transfer from units completed at another training organisation, you will need to complete an Application for Exemption Form available from any campus, centre, or team, or a copy of the form can be obtained from the web.

Your completed Application for Exemption form together with attached documentary evidence (certified copy of Qualification/Statement of Attainment) to support your request for exemption/credit transfer should be submitted directly to the University either in person or by mail. Requests without documentary evidence will not be processed and will be returned to students. There are no fees attached to Credit Transfers.

Pathways

VET to Higher Education Pathway Mapping for completed Awards in the same field or discipline.

Further training pathways from this qualification include, but are not limited to AUR40212 Certificate IV in Automotive Mechanical Diagnosis (CDU do not deliver), AUR40812 Certificate IV in Automotive Mechanical Overhauling (CDU do not deliver), or other relevant qualifications.

Fees

Domestic Students
2022 VET fees will be published as soon as they become available.

VET tuition fees

NT Government subsidised places are available for this course.
2021: VET Tuition Fees for 2021 will be charged at $3.50 per nominal hour for subsidised training. More detailed Information about 2021 VET Tuition fees for eligible NT residents will be published in the 2021 VET Student Guide or VET Fees.
2022: VET Tuition Fees for 2022 will be published no later than 1 December 2021.

Domestic full fees

VET full fees are applicable to this course.
2021: Information about fees for non-subsidised VET courses are available in the VET Student Guide.
2022: Information about fees for non-subsidised VET courses will be published no later than 1 December 2021.

CDU trades student

Why study trades at CDU?

Whether you're an apprentice, a trainee, or already working in the industry, our trades courses are for you.

Start your career or upskill in a variety of areas from construction and electrotechnology to plumbing and metal trades. Wherever your interest lies, you'll learn from experts with industry-standard technologies and tools so you can graduate workplace ready.

  • NT's largest training provider
  • Access to specialised trade training facilities
  • Recognition of prior learning so you can qualify faster

What will I study?

To achieve a CERTIFICATE III in MOBILE PLANT TECHNOLOGY a total of THIRTY-SIX (36) units of competency must be completed comprising TWENTY-TWO (22) Core and FOURTEEN (14) Elective units as detailed in the packaging rules and listed below.The total Nominal Hours for the sequence listed below is 1200.

Course structure

To achieve a CERTIFICATE III in MOBILE PLANT TECHNOLOGY a total of THIRTY-SIX (36) units of competency must be completed comprising TWENTY-TWO (22) Core and FOURTEEN (14) Elective units as detailed in the packaging rules and listed below.
The total Nominal Hours for the sequence listed below is 1200.

Code Module/Unit of Competency Hours
CORE UNITS OF COMPETENCY
AURAEA002 Follow environmental and sustainability best practice in an automotive workplace 25
AURASA002 Follow safe working practices in an automotive workplace 20
AURETR012 Test and repair basic electrical circuits 40
AURETR024 Diagnose and repair compression ignition engine management systems 50
AURETR025 Test, charge and replace batteries and jump-start vehicles 15
AURETR029 Diagnose and repair charging systems 30
AURETR030 Diagnose and repair starting systems 30
AURHTE002 Diagnose and repair heavy vehicle compression ignition engines 70
AURHTF002 Diagnose and repair heavy vehicle diesel fuel injection systems 80
AURKTA005 Inspect, service and repair track type drive and support systems 30
AURKTA011 Diagnose and repair mobile plant hydraulic systems 60
AURKTB001 Diagnose and repair mobile plant braking systems 40
AURKTD002 Diagnose and repair mobile plant steering systems 40
AURKTQ001 Diagnose and repair mobile plant final drive assemblies 30
AURKTX001 Diagnose and repair powershift transmissions 50
AURTTA004 Carry out servicing operations 20
AURTTA006 Inspect and service hydraulic systems 20
AURTTA018 Carry out diagnostic procedures 20
AURTTC003 Diagnose and repair cooling systems 20
AURTTF005 Diagnose and repair engine forced-induction systems 15
AURTTK002 Use and maintain tools and equipment in an automotive workplace 20
AURTTX006 Diagnose and repair hydrostatic transmissions 40
  Total nominal hours for core units 765
ELECTIVE UNITS OF COMPETENCY
AURHTB001 Diagnose and repair heavy vehicle air braking systems 50
AURHTE001 Remove and install heavy vehicle engine assemblies 35
AURHTQ003 Diagnose and repair heavy vehicle drive shafts 30
AURHTX001 Diagnose and repair heavy vehicle manual transmissions 50
AURHTX004 Diagnose and repair heavy vehicle clutch systems 35
AURHTZ001 Diagnose and repair heavy vehicle emission control systems 20
AURETR044 Diagnose and repair integrated engine and transmission management systems 50
AURKTD001 Diagnose and repair mobile plant suspension systems 40
AURTTF002 Inspect and service diesel fuel injection systems 20
AURTTK001 Use and maintain measuring equipment in an automotive workplace 15
AURTTC001 Inspect and service cooling systems 10
AURVTW001 Carry out manual metal arc welding on components 30
AURVTW009 Carry out basic gas metal arc welding 20
AURVTW018 Carry out oxyacetylene welding, thermal heating and cutting 30
  Total nominal hours for elective units 435
  Total nominal hours for the qualification 1200

 

Entry requirements

Admission criteria

CDU Domestic Entry Requirements

To gain entry into AUR31216 - Certificate III in Mobile Plant Technology candidates require: A registered NT apprenticeship.

Students will need to wear work clothing suited to the automotive industry such as:

  • Steel cap boots
  • Safety glasses
  • Protective clothing

Students will need to demonstrate an appropriate level of language, literacy and numeracy skills and knowledge to undertake a course at this level.

Essential requirements

English language requirements

All of my lecturers were top notch former tradies with a solid grasp of what they were teaching. Whatever my issue was, they were always there for me. It was great.

Yron

CDU Student

Yron VET Trades

Course details

Accreditation

This is a current, nationally accredited qualification from the AUR Automotive Retail, Service and Repair Training Package due to be replaced during 2022. It is recommended that students contact CDU for current course details.

VET for secondary schools

VET for Secondary Students (VSS)

Select VSS for more detail about this program.

Employability skills

Employability Skills are embedded in the training and assessment of national training package qualifications. Information on the Employability Skills relevant to your qualification can be obtained by visiting this website and keying in the national code for the qualification: training.gov.au

Location and study mode

Delivery at all locations is subject to sufficient demand and resources.

Locations: Casuarina

Study Mode:On campus

Additional information

Sector
Vocational Education & Training
Industry groups
AUTOMOTIVE
Occupation types
Motor Mechanic (General)
Area of study
Automotive

Contact details

Email:Student.Central@cdu.edu.au. Phone: (08) 8946 7766 or 1800 061 963 (free call).

You make CDU

Together we are a positive force for change in our communities and the world.

How to apply

How to apply for domestic students

CDU VET has several pathways for you to apply.

 

Visit How to apply for CDU VET courses for more information.

 

Admission requirements for domestic students

Before applying, you may want to check if you meet the admission requirements for studying with CDU.

 

CDU has many pathways to study, so don't worry if you don't meet the admission requirements right now. There is a study pathway to get you started on your journey.

Not sure if you are a domestic or international student?

That's OK - it can be a little tricky to know the difference.

 

To help you out, we've put together a guide to answer any questions you might have.

How to apply for international students

Applications to CDU must be submitted online.

 

The process is simple, all you need is a valid email address to create your online account.

 

Once you have started the application you will have the option of saving your application and resuming it at a later date.

 

There is no application fee when you apply online.

Find a CDU agent partner

Applicants may seek further information about international education in Australia from the Australian Government Department of Education and Training or from our overseas / external representatives.

 

To help with the process, we've compile a list of authorised representatives.

Not sure if you are a domestic or international student?

That's OK - it can be a little tricky to know the difference.

 

To help you out, we've put together a guide to answer any questions you might have.

 

Things like the difference between domestic and international students or the difference between course types like VET and undergraduate.

We’re here to help you

By submitting this form you agree to receive future student communications such as key date reminders, study tips, real student stories and more. Of course, you can unsubscribe at any time. See our privacy policy for more information.