Skip to main content

Vocational Education & Training

CPC40110 Certificate IV in Building and Construction (Building)

2019

Didn't study in Australia? Switch to international student information

Not available to international students.
Download course pack
Overview

Casuarina

Estimated completion time: 1 year/s

The length of time to complete this qualification will depend on the location, study mode and selected units.
Refer to the relevant course information flyer for further information.

CDU Reference
Sector
Vocational Education & Training
Industry groups
BUILDING AND CONSTRUCTION
Occupation types
Building Associate

This course is designed to enable potential builders to improve their business skills and technical knowledge, so that they can successfully manage a business. This course covers building theory and practice related to low rise buildings and associated light steel structures. Graduates will have developed specialist skills and knowledge in area such as plan interpretation, quantities take-off, estimating, scheduling, construction technology, Occupational Health and Safety, site supervision, surveying, cost control, and business management.

The completion of this CPC40110 Certificate IV Building and Construction (Building) forms part of the requirements to obtain a Builders Licence, details can be found on the Builders Practitioners Board website.

Career opportunities

Occupations relevant to this qualification in industry sectors such as Building Trades, Construction Services include:

  • Builder
  • Construction Manager

Credit transfers & pathways

Skills recognition

Recognition of Prior Learning (RPL)
RPL is the acknowledgement of a person's skills and knowledge acquired through previous training, work or life experience, which may be used to grant status or credit in a subject regardless of how and where they were attained, including overseas.
This can include skills from:

  • Previous study excluding courses at another VET/TAFE institution, but including courses at school or college, through adult education classes or training programs at work;
  • Work experience (including both work that is paid and unpaid); and/or
  • Life experience (for example leisure pursuits or voluntary work).

RPL is a form of assessment. It is used to determine whether a person has acquired, through formal or informal learning, the skills and experience consistent with the stated competency standards that comprise a qualification. RPL is not time referenced, so there are no parameters on how or when the skills are acquired. However, the skills that have been acquired through life experience etc., must be current and must match the elements and performance criteria contained in the individual unit.

Students seeking RPL need to indicate this on their enrolment form at the time of enrolment.

For further information please refer to the Applicant's Guide to the Recognition of Prior Learning or contact VET RPL Enquiries on 1800 238 838 or email vet.rpl.enquiries@cdu.edu.au.

Credit Transfer
Charles Darwin University as a Registered Training Organisation recognises the Australian Qualifications Framework qualifications and Statement of Attainments issued by any other Australian Registered Training Organisation.

Students are encouraged to submit any requests for credit from previous studies at the time of enrolment, to ensure they are not enrolling in units they may not need to undertake.
In order to apply for exemption/credit transfer from units completed at another training organisation, you will need to complete an Application for Exemption Form available from any campus, centre, or team, or a copy of the form can be obtained from the web.

Your completed Application for Exemption form together with attached documentary evidence (certified copy of Qualification/Statement of Attainment) to support your request for exemption/credit transfer should be submitted directly to the University either in person or by mail. Requests without documentary evidence will not be processed and will be returned to students. There are no fees attached to Credit Transfers.

Pathways

VET to Higher Education Pathway Mapping for completed Awards in the same field or discipline

 

Students who successfully complete VET qualifications at the Certificate IV level or above and subsequently enrol in a Bachelor degree in the same field or discipline, will receive advanced standing as detailed in the table below.

Completed Award Course Level
HE
VET
to a HE Award
Credit granted for a completed award in the same field
Certificate IV
*
3 year Bachelor award
up to 40 credit points
Certificate IV
*
4 year Bachelor award
up to 40 credit points
Diploma
*
*
3 year Bachelor award
up to 80 credit points
Diploma
*
*
4 year Bachelor award
up to 80 credit points
Advanced Diploma
*
*
3 year Bachelor award
up to 160 credit points
Advanced Diploma
*
*
4 year Bachelor award
up to 160 credit points
Associate Degree
*
3 year Bachelor award
up to 160 credit points
Associate Degree
*
4 year Bachelor award
up to 160 credit points

Further training pathways from this qualification include, but are not limited to engineering, project management or design.

Course information flyer(s)


2019 Course Information Flyers will be published early in 2019.

Entry requirements

CDU Entry Requirements - 2018

To gain entry into CPC40110 Certificate IV in Building and Construction (Building) candidates require:

  • Successful completion of English and Maths to a year 12 standard
  • Mature aged students, with industry skills and knowledge
  • Confident computer literacy
  • Candidates are expected to have or obtain an NT White card

Students need to complete an online literacy and numeracy assessment to show that they have an appropriate level of LLN skills to participate successfully in the course and to identify any additional support needs.

Course fees

2019 VET fees will be published early in December 2018.

The following Fees are applicable to this course:

Domestic Students

Domestic full fees

This course is a full fee paying course. VET full fees will apply to all new and continuing domestic students enrolling in this course.
2019: Information about fees for non-subsidised VET courses is available 2019 VET Fees.pdf.

VET tuition fees

This course is subsidised by the NT Government.
2019: Information about 2019 VET Tuition fees for eligible NT residents is available 2019 VET Fees.pdf. VET Tuition Fees for 2019 will be charged at $3.20 per nominal hour for subsidised training.

  • This is a current, nationally accredited qualification from the CPC08 Construction, Plumbing and Services Training Package.

  • Away from base

    AFB: This is an approved Away From Base (AFB) 'mixed-mode' course.For further information about AFB see www.cdu.edu.au/afb

    Employability skills

    Employability Skills are embedded in the training and assessment of national training package qualifications. Information on the Employability Skills relevant to your qualification can be obtained by visiting this website and keying in the national code for the qualification: training.gov.au

    Location and study mode

    Delivery at all locations is subject to sufficient demand and resources.

    Locations: Casuarina

    Study Mode: Mixed mode
    Some components of this qualification may be available in other modes of delivery and not all modes are available at all locations.

    Subject to demand other locations and modes may become available throughout the year.

Contact details

Building Technology
Location: Casuarina Campus
Phone: 08 8946 7508
Fax: N/A
Email: vet.buildtech@cdu.edu.au

Trades (Central)
Location: Alice Springs Campus
Phone: 08 8959 5465
Fax: N/A
Email: vet.trades.central@cdu.edu.au

Course structure

To achieve a Certificate IV in Building and Construction (Building) a total of SIXTEEN (16) units of competency must be completed. This comprises THIRTEEN (13) core units of competency plus THREE (3) elective units of competency as detailed in the packaging rules and listed below.

The total nominal hours
for the sequence listed below is 800. The total nominal hours for this qualification will vary depending on the elective units

Code Module/Unit of Competency
Hours
CORE UNITS OF COMPETENCY
BSBSMB406A Manage small business finances 60
CPCCBC4001A Apply building codes and standards to the construction process for low rise building projects
40
CPCCBC4002A Manage occupational health and safety in the building and construction workplace
40
CPCCBC4003A Select and prepare a construction contract
40
CPCCBC4004A Identify and produce estimated costs for building and construction projects
60
CPCCBC4005A Produce labour and materials schedules for ordering
40
CPCCBC4006B Select, procure and store construction materials for low rise projects
40
CPCCBC4007A Plan building or construction work
40
CPCCBC4008B Conduct on-site supervision of building and construction projects
40
CPCCBC4009B Apply legal requirements to building and construction projects
50
CPCCBC4010B Apply structural principles to residential low rise constructions
160
CPCCBC4011B Apply structural principles to commercial low rise constructions
80
CPCCBC4012B Read and interpret plans and specifications
30
  Total nominal hours - core units
720
ELECTIVE UNITS OF COMPETENCY
CPCCBC4013A Prepare and evaluate tender documents 20
CPCCBC4015A Prepare specification for all construction works 20
CPCCBC4020A Build thermally efficient and sustainable structures 40
  Total nominal hours - elective units
80
  Total nominal hours for the qualification
800

 

Everything you need to know to get started

How to apply for domestic students

CDU VET has several pathways for you to apply.

 

Visit How to apply for CDU VET courses for more information.

 

Admission requirements for domestic students

Before applying, you may want to check if you meet the admission requirements for studying with CDU.

 

CDU has many pathways to study, so don't worry if you don't meet the admission requirements right now. There is a study pathway to get you started on your journey.

Not sure if you are a domestic or international student?

That's OK - it can be a little tricky to know the difference.

 

To help you out, we've put together a guide to answer any questions you might have.

Are you applying as an International Student?

Everything you need to get apply

How to apply for international students

Applications to CDU must be submitted online.

 

The process is simple, all you need is a valid email address to create your online account.

 

Once you have started the application you will have the option of saving your application and resuming it at a later date.

 

There is no application fee when you apply online.

Find a CDU agent partner

Applicants may seek further information about international education in Australia from the Australian Government Department of Education and Training or from our overseas / external representatives.

 

To help with the process, we've compile a list of authorised representatives.

Not sure if you are a domestic or international student?

That's OK - it can be a little tricky to know the difference.

 

To help you out, we've put together a guide to answer any questions you might have.

 

Things like the difference between domestic and international students or the difference between course types like VET and undergraduate.

Are you applying as a Domestic Student?

Shortlist 0
Your Shortlist

Your Shortlist is empty

Find courses and add them to your shortlist by clicking on the

Your Shortlist was sent to your inbox

It may take up to 5 minutes.

Return to Shortlist
Course
Course Code