Skip to main content

Vocational Education & Training

MEM30205 Certificate III in Engineering - Mechanical Trade

2018

Didn't study in Australia? Switch to international student information

Not available to international students.
Download course pack
Overview

Estimated completion time: 3 year/s

The length of time to complete this qualification will depend on the location, study mode and selected units.

CDU Reference
Sector
Vocational Education & Training
Industry groups
ENGINEERING AND MINING
Occupation types
Mechanical Engineering Trades Workers Nfd

The Certificate III in Engineering - Mechanical Trade is for apprentices in manufacturing, engineering and related industry areas. They will acquire skills and knowledge to

  • Perform engineering measurements,
  • Perform computations,
  • Apply principles of occupational health and safety in the work environment,
  • Plan to undertake a routine task,
  • Plan a complete activity,
  • Apply quality systems,
  • Apply quality procedures,
  • Organise and communicate information,
  • Work with others in a manufacturing, engineering or related environment,
  • Interact with computing technology,
  • Assist in the provision of on the job training,
  • Perform general machining,
  • Perform lathe operations,
  • Perform milling operations,
  • Perform complex lathe operations,
  • Interpret technical drawing,
  • Use hand tools,
  • Use power tools/hand held operations,
  • Use tools for precision work,
  • Repair and fit engineering components,
  • Maintain and repair mechanical drives and mechanical transmission assemblies,
  • Balance equipment,
  • Perform levelling and alignment of machines and engineering components,
  • Gland packing,
  • Maintain hydraulic system components,
  • Maintain and repair hydraulic systems,
  • Dismantle, replace and assemble engineering components,
  • Carry out mechanical cutting,
  • Perform manual heating and thermal cutting,
  • Perform routine manual metal arc welding,
  • Perform routine gas metal arc welding,
  • Perform precision mechanical measurement and
  • Mark off/out (general engineering).

Note: This course may be updated in 2018. Please contact the relevant VET school/team for current course details and location.

Career opportunities

Employment opportunities as engineering trades persons - mechanical can be in industries such as manufacturing, maintenance, repairs, jobbing and general engineering.

It also allows entry into Engineering (Post Trade), Certificate IV and Diploma of Engineering courses.

Credit transfers & pathways

Skills recognition

Recognition of Prior Learning (RPL)
RPL is the acknowledgement of a person's skills and knowledge acquired through previous training, work or life experience, which may be used to grant status or credit in a subject regardless of how and where they were attained, including overseas.
This can include skills from:

  • Previous study excluding courses at another VET/TAFE institution, but including courses at school or college, through adult education classes or training programs at work;
  • Work experience (including both work that is paid and unpaid); and/or
  • Life experience (for example leisure pursuits or voluntary work).

RPL is a form of assessment. It is used to determine whether a person has acquired, through formal or informal learning, the skills and experience consistent with the stated competency standards that comprise a qualification. RPL is not time referenced, so there are no parameters on how or when the skills are acquired. However, the skills that have been acquired through life experience etc., must be current and must match the elements and performance criteria contained in the individual unit.

Students seeking RPL need to indicate this on their enrolment form at the time of enrolment.

For further information please refer to the Applicant's Guide to the Recognition of Prior Learning or contact VET RPL Enquiries on 1800 238 838 or email vet.rpl.enquiries@cdu.edu.au.

Credit Transfer
Charles Darwin University as a Registered Training Organisation recognises the Australian Qualifications Framework qualifications and Statement of Attainments issued by any other Australian Registered Training Organisation.

Students are encouraged to submit any requests for credit from previous studies at the time of enrolment, to ensure they are not enrolling in units they may not need to undertake.
In order to apply for exemption/credit transfer from units completed at another training organisation, you will need to complete an Application for Exemption Form available from any campus, centre, or team, or a copy of the form can be obtained from the web.

Your completed Application for Exemption form together with attached documentary evidence (certified copy of Qualification/Statement of Attainment) to support your request for exemption/credit transfer should be submitted directly to the University either in person or by mail. Requests without documentary evidence will not be processed and will be returned to students. There are no fees attached to Credit Transfers.

Pathways

VET to Higher Education Pathway Mapping for completed Awards in the same field or discipline

 

At the completion of Certificate III in Engineering - Mechanical Trade (MEM30205) apprentice training, students may articulate directly into further studies in Certificate IV in Engineering (MEM40105) or to employment.

Entry requirements

There are no minimum academic qualifications for entry, however, students must have a contract of training in the engineering industry.

Course fees

The following Fees are applicable to this course:

Domestic Students

VET tuition fees

This course is subsidised by the NT Government. Information about VET Tuition fees for eligible NT residents is available in the VET Student Guide, VET Fees online or 2018 VET Fees.pdf. VET Tuition Fees for 2018 will be charged at $3.00 per nominal hour for subsidised training.

  • This is a current, nationally accredited qualification from the MEM05 Metal and Engineering Training Package.

  • VET for Secondary Students (VSS)

    Select VSS for more detail about this program.

    Away from base

    AFB: This is an approved Away From Base (AFB) 'mixed-mode' course.For further information about AFB see www.cdu.edu.au/afb

    Employability skills

    Employability Skills are embedded in the training and assessment of national training package qualifications. Information on the Employability Skills relevant to your qualification can be obtained by visiting this website and keying in the national code for the qualification: training.gov.au

    Location and study mode

    Delivery at all locations is subject to sufficient demand and resources.

Contact details

Metal Trades and Engineering
Location: Casuarina Campus
Phone: 08 8946 7507
Fax: 08 8946 7439
Email: mte@cdu.edu.au

Course structure

Course Requirements

The minimum requirements for achievement of the Certificate III in Engineering - Mechanical Trade are:

  • completion of all of the mandatory units of competency listed below, and
  • completion of specialisation units from the list of available units detailed in the packaging rules to bring the total value of Mechanical Trade stream and Specialisation units to at least 73 points.

Points associated with prerequisites count towards the total. Note that up to 15 points value of units of competency may be drawn from other endorsed Training Packages where those units are available for inclusion at Certificate III. Only select units that would be suitable for occupational outcomes in a mechanical trade environment.

The total Nominal Hours for the sequence listed below is 1020. The total nominal hours for this qualification will vary depending on the elective units selected.

Code Module/Unit of Competency
Points
Hours
MANDATORY UNITS OF COMPETENCY
MEM12023A Perform engineering measurements  
30
MEM12024A Perform computations  
30
MEM13014A Apply principles of occupational health and safety in the work environment  
10
MEM14004A Plan to undertake a routine task  
10
MEM14005A Plan a complete activity  
20
MEM15002A Apply quality systems  
20
MEM15024A Apply quality procedures  
10
MEM16006A Organise and communicate information  
20
MEM16007A Work with others in a manufacturing, engineering or related environment  
10
MEM16008A Interact with computing technology  
20
MEM17003A Assist in the provision of on the job training  
20
MSAENV272B Participate in environmentally sustainable work practices  
30
  Mandatory units of Competency nominal hours  
230
MECHANICAL TRADE STREAM UNITS OF COMPETENCY
MEM07005C Perform general machining
8
80
MEM07006C Perform lathe operations
4
40
MEM07007C Perform milling operations
4
40
MEM07021B Perform complex lathe operations
4
40
MEM09002B Interpret technical drawing
4
40
MEM18001C Use hand tools
2
20
MEM18002B Use power tools/hand held operations
2
20
MEM18003C Use tools for precision work
4
40
MEM18005B Perform fault diagnosis, installation and removal of bearings
4
40
MEM18006C Repair and fit engineering components
6
60
MEM18007B Maintain and repair mechanical drives and mechanical transmission assemblies
4
40
MEM18009B Perform levelling and alignment of machines and engineering components
4
40
  Mechanical Trade Stream units Nominal hours
50
500
SPECIALISATION UNITS OF COMPETENCY
MEM05005B Carry out mechanical cutting
2
20
MEM05007C Perform manual heating and thermal cutting
2
20
MEM05012C Perform routine manual metal arc welding
2
20
MEM05050B Perform routine gas metal arc welding
2
20
MEM12003B Perform precision mechanical measurement
2
20
MEM12006C Mark off/out (general engineering)
4
40
MEM18008B Balance equipment
2
20
MEM18013B Perform Gland packing
2
20
MEM18020B Maintain hydraulic system components
4
40
MEM18021B Maintain hydraulic systems
4
40
MEM18055B Dismantle, replace and assemble engineering components
3
30
  Specialisation Units nominal hours
29
290

Everything you need to know to get started

How to apply for domestic students

CDU VET has several pathways for you to apply.

 

Visit How to apply for CDU VET courses for more information.

 

Admission requirements for domestic students

Before applying, you may want to check if you meet the admission requirements for studying with CDU.

 

CDU has many pathways to study, so don't worry if you don't meet the admission requirements right now. There is a study pathway to get you started on your journey.

Not sure if you are a domestic or international student?

That's OK - it can be a little tricky to know the difference.

 

To help you out, we've put together a guide to answer any questions you might have.

 

Things like the difference between domestic and international students or the difference between course types like VET and undergraduate.

Are you applying as an International Student?

Everything you need to get apply

How to apply for international students

Applications to CDU must be submitted online.

 

The process is simple, all you need is a valid email address to create your online account.

 

Once you have started the application you will have the option of saving your application and resuming it at a later date.

 

There is no application fee when you apply online.

Find a CDU agent partner

Applicants may seek further information about international education in Australia from the Australian Government Department of Education and Training or from our overseas / external representatives.

 

To help with the process, we've compile a list of authorised representatives.

Not sure if you are a domestic or international student?

That's OK - it can be a little tricky to know the difference.

 

To help you out, we've put together a guide to answer any questions you might have.

 

Things like the difference between domestic and international students or the difference between course types like VET and undergraduate.

Are you applying as a Domestic Student?

Shortlist 0
Your Shortlist

Your Shortlist is empty

Find courses and add them to your shortlist by clicking on the

Your Shortlist was sent to your inbox

It may take up to 5 minutes.

Return to Shortlist
Course
Course Code