Skip to main content

Vocational Education & Training

RII30115 Certificate III in Surface Extraction Operations

2018

Didn't study in Australia? Switch to international student information

Download course pack
Overview

Estimated completion time: year/s

The length of time to complete this qualification will depend on the location, study mode and selected units.

CDU Reference
Sector
Vocational Education & Training
Industry groups
ENGINEERING AND MINING
Occupation types
Miner

Available by RPL ONLY

This qualification reflects the role of employees such as production operators in an open cut mine or quarry, who perform tasks involving a broad range of skilled applications in a varied work context, using some discretion and judgement in selecting equipment, services or contingency measures.

Licensing, legislative, regulatory and certification requirements that apply to this qualification can vary between states, territories, and industry sectors. Relevant information must be sourced prior to application of the qualification.

This qualification is only available by Recognition of Prior Learning (RPL).

Entry requirements

There are no formal entry requirements for this qualification.
Students will need to demonstrate an appropriate level of language, literacy and numeracy skills and
knowledge to undertake a course at this level.

Course fees

This course is available via RPL only. Thus the course fees for this RPL are $80.00.

The following Fees are applicable to this course:

Domestic Students

VET tuition fees

This course is subsidised by the NT Government. Information about VET Tuition fees for eligible NT residents is available in the VET Student Guide, VET Fees online or 2018 VET Fees.pdf. VET Tuition Fees for 2018 will be charged at $3.00 per nominal hour for subsidised training.

Career opportunities

Occupations relevant to this qualification in industry sectors such as Mechanical Engineering, Mineral Mining Exploration, Coal Mining, Quarrying, Blast Hole Drilling include:

  • Excavator Operator (Mining and Extractive Industries)
  • Remote Control Room Operator
  • Grader Operator (Extractive Industries)
  • Quarry Equipment Operator
  • Shotfirer
  • Face Loader Operator
  • Haul Truck Operator (Extractive Industries)
  • Open Cut Coal Miner
  • Quarry Mobile Equipment Operator
  • Quarry Operations Leading Hand
  • Scraper Operator (Mining)
  • Shotfirer's Assistant
  • Water Cart Operator
  • Mobile Plant Operator (Extractive Industries)
  • Plant Service and Maintenance Operator (Quarry)
  • Dredge Operator
  • Weighbridge Operator
  • Sales Loader Operator
  • Grader Operator (Mining)
  • Bogger Operator
  • Quarry Processing Plant Operator
  • Skills recognition

    Recognition of Prior Learning (RPL)
    RPL is the acknowledgement of a person's skills and knowledge acquired through previous training, work or life experience, which may be used to grant status or credit in a subject regardless of how and where they were attained, including overseas.
    This can include skills from:

    • Previous study excluding courses at another VET/TAFE institution, but including courses at school or college, through adult education classes or training programs at work;
    • Work experience (including both work that is paid and unpaid); and/or
    • Life experience (for example leisure pursuits or voluntary work).

    RPL is a form of assessment. It is used to determine whether a person has acquired, through formal or informal learning, the skills and experience consistent with the stated competency standards that comprise a qualification. RPL is not time referenced, so there are no parameters on how or when the skills are acquired. However, the skills that have been acquired through life experience etc., must be current and must match the elements and performance criteria contained in the individual unit.

    Students seeking RPL need to indicate this on their enrolment form at the time of enrolment.

    For further information please refer to the Applicant's Guide to the Recognition of Prior Learning or contact VET RPL Enquiries on 1800 238 838 or email vet.rpl.enquiries@cdu.edu.au.

    Credit Transfer
    Charles Darwin University as a Registered Training Organisation recognises the Australian Qualifications Framework qualifications and Statement of Attainments issued by any other Australian Registered Training Organisation.

    Students are encouraged to submit any requests for credit from previous studies at the time of enrolment, to ensure they are not enrolling in units they may not need to undertake.
    In order to apply for exemption/credit transfer from units completed at another training organisation, you will need to complete an Application for Exemption Form available from any campus, centre, or team, or a copy of the form can be obtained from the web.

    Your completed Application for Exemption form together with attached documentary evidence (certified copy of Qualification/Statement of Attainment) to support your request for exemption/credit transfer should be submitted directly to the University either in person or by mail. Requests without documentary evidence will not be processed and will be returned to students. There are no fees attached to Credit Transfers.

    Pathways

    VET to Higher Education Pathway Mapping for completed Awards in the same field or discipline

     

  • This is a current, nationally accredited qualification from the RII Resources and Infrastructure Industry Training Package.

  • VET for Secondary Students (VSS)

    Select VSS for more detail about this program.

    Employability skills

    Employability Skills are embedded in the training and assessment of national training package qualifications. Information on the Employability Skills relevant to your qualification can be obtained by visiting this website and keying in the national code for the qualification: training.gov.au

    Location and study mode

    Delivery at all locations is subject to sufficient demand and resources.

    Locations: Casuarina

    Study Mode: RPL only
    Some components of this qualification may be available in other modes of delivery and not all modes are available at all locations.

    Subject to demand other locations and modes may become available throughout the year.

Contact details

Automotive and Civil
Location: Casuarina Campus
Phone: 08 8946 7506
Fax: 08 8946 6433
Email: automotiveandcivil@cdu.edu.au

Course structure

Available by RPL Only 

To achieve a CERTIFICATE III IN SURFACE EXTRACTION OPERATIONS a total of THIRTEEN (13) units of competency must be completed comprising THREE (3) Core and TEN (10) Elective units as detailed in the packaging rules and listed below.

Elective units must comprise of:

  • one (1) must be chosen from Group A
  • one (1) must be chosen from Group B
  • at least three (3) must be chosen from Group C
  • no more than three (3) may be chosen from Group D
  • no more than two (2) may be chosen from within this training package or from another endorsed training package, or from an accredited course.

The total Nominal Hours for the sequence listed below  will depend on the elective units chosen.
 

Code Module/Unit of Competency
Hours
CORE UNITS OF COMPETENCY
RIIENV201D Identify and assess environmental and heritage concerns
20
RIIRIS301D Apply risk management processes
40
RIIWHS201D Work safely and follow WHS policies and procedures
20
Total nominal hours for core units
80
ELECTIVE UNITS OF COMPETENCY (Group A)
RIICOM301D Communicate information
30
RIICOM302D Communicate workplace information
20
ELECTIVE UNITS OF COMPETENCY (Group B)
RIIGOV201D Comply with site work processes/procedures
20
RIIQUA201D Maintain and monitor site quality standards
20
ELECTIVE UNITS OF COMPETENCY (Group C)
RIIBHD305D Conduct down-hole hammer drilling
40
RIIMEX302D Assess ground conditions
20
RIIMPO206D Conduct bulk water truck operations
30
RIIMPO301D Conduct hydraulic excavator operations 40
RIIMPO302D Conduct hydraulic shovel operations 40
RIIMPO304D Conduct wheel loader operations 40
RIIMPO306D Operate plant/machinery on live stockpiles 24
RIIMPO308E Conduct tracked dozer operations 40
RIIMPO309E Conduct wheeled dozer operations 40
RIIMPO310E Conduct grader operations 40
RIIMPO312D Conduct scraper operations 40
RIIMPO313D Conduct face loading operations 40
RIIMPO331D Conduct stockpile dozer operations 40
RIIMPO337D Conduct articulated truck operations 40
RIIMPO338D Conduct rigid haul truck operations 40
RIIPRO301D Conduct crushing and screening plant operations 50
RIISAM202D Isolate and access plant 30
RIISAM301E Test operational functions of vehicles and equipment 30
RIISRM301D Blend stockpile materials 20
RIISRM302D Conduct stockpile reclaiming operations 40
RIISRM303D Move and position materials to form stockpiles 24
RIISRM304D Maintain stockpiles 20
RIIVEH201D Operate light vehicle 30
ELECTIVE UNITS OF COMPETENCY (Group D)
RIICRC310D Construct and maintain roads 60
RIIHAN305D Operate a gantry or overhead crane 40
RIIHAN307D Operate a vehicle loading crane 40
RIIHAN311E Conduct operations with integrated tool carrier 80
RIIVEH303D Drive heavy combination vehicle 40
RIIVEH306D Operate mine services vehicle 20
TLIC3004A Drive heavy rigid vehicle 40
 Total nominal hours for the qualification will vary

 

 

Everything you need to know to get started

How to apply for domestic students

CDU VET has several pathways for you to apply.

 

Visit How to apply for CDU VET courses for more information.

 

Admission requirements for domestic students

Before applying, you may want to check if you meet the admission requirements for studying with CDU.

 

CDU has many pathways to study, so don't worry if you don't meet the admission requirements right now. There is a study pathway to get you started on your journey.

Not sure if you are a domestic or international student?

That's OK - it can be a little tricky to know the difference.

 

To help you out, we've put together a guide to answer any questions you might have.

 

Things like the difference between domestic and international students or the difference between course types like VET and undergraduate.

Are you applying as an International Student?

Everything you need to get apply

How to apply for international students

Applications to CDU must be submitted online.

 

The process is simple, all you need is a valid email address to create your online account.

 

Once you have started the application you will have the option of saving your application and resuming it at a later date.

 

There is no application fee when you apply online.

Find a CDU agent partner

Applicants may seek further information about international education in Australia from the Australian Government Department of Education and Training or from our overseas / external representatives.

 

To help with the process, we've compile a list of authorised representatives.

Not sure if you are a domestic or international student?

That's OK - it can be a little tricky to know the difference.

 

To help you out, we've put together a guide to answer any questions you might have.

 

Things like the difference between domestic and international students or the difference between course types like VET and undergraduate.

Are you applying as a Domestic Student?

Shortlist 0
Your Shortlist

Your Shortlist is empty

Find courses and add them to your shortlist by clicking on the

Your Shortlist was sent to your inbox

It may take up to 5 minutes.

Return to Shortlist
Course
Course Code