Alice Springs, Casuarina
Estimated completion time: 4 year/s
The length of time to complete this qualification will depend on the location, study mode and selected units.
Refer to the relevant course information flyer for further information.
This qualification provides competencies to select, install, set up, test, fault find, repair and maintain electrical systems and equipment in building and premises. It includes ERAC requirements for an 'Electrician's licence'.
This qualification is only available as an Apprenticeship.
Based on course nominal hours of between 1120 - 1220 hours, approximate 2020 course fees will be:
VET Tuition Fees: $3,808.00 - $4,148.00
Domestic Full Fees: $19,040.00 - $20,740.00
Fee for Service: as per fee for service agreement
The following Fees are applicable to this course:
This course is subsidised by the NT Government.
2020: VET Tuition Fees for 2020 will be charged at $3.40 per nominal hour for subsidised training. More detailed Information about 2020 VET Tuition fees for eligible NT residents is available in the VET Student Guide.
Occupations relevant to this qualification in industry sectors such as Electrical Engineering, Entertainment Systems and Servicing, Electrotechnology, Electronics and Computer Systems, Electricity Distribution, Systems Electrics include:
- Electrician (Explosion Equipment)
- Electronics Tradesperson (Marine)
- Lift Electrician
- Vending Machine Servicer
- Electrician (Hazardous Areas)
- Meter Installer (Electricity)
- Electrician,Fire Protection Technician
Credit transfers & pathways
Recognition of Prior Learning (RPL)
RPL is the acknowledgement of a person's skills and knowledge acquired through previous training, work or life experience, which may be used to grant status or credit in a subject regardless of how and where they were attained, including overseas.
This can include skills from:
- Previous study excluding courses at another VET/TAFE institution, but including courses at school or college, through adult education classes or training programs at work;
- Work experience (including both work that is paid and unpaid); and/or
- Life experience (for example leisure pursuits or voluntary work).
RPL is a form of assessment. It is used to determine whether a person has acquired, through formal or informal learning, the skills and experience consistent with the stated competency standards that comprise a qualification. RPL is not time referenced, so there are no parameters on how or when the skills are acquired. However, the skills that have been acquired through life experience etc., must be current and must match the elements and performance criteria contained in the individual unit.
Students seeking RPL need to indicate this on their enrolment form at the time of enrolment.
For further information please refer to the Applicant's Guide to the Recognition of Prior Learning or contact VET RPL Enquiries on 1800 238 838 or email email@example.com.
Charles Darwin University as a Registered Training Organisation recognises the Australian Qualifications Framework qualifications and Statement of Attainments issued by any other Australian Registered Training Organisation.
Students are encouraged to submit any requests for credit from previous studies at the time of enrolment, to ensure they are not enrolling in units they may not need to undertake.
In order to apply for exemption/credit transfer from units completed at another training organisation, you will need to complete an Application for Exemption Form available from any campus, centre, or team, or a copy of the form can be obtained from the web.
Your completed Application for Exemption form together with attached documentary evidence (certified copy of Qualification/Statement of Attainment) to support your request for exemption/credit transfer should be submitted directly to the University either in person or by mail. Requests without documentary evidence will not be processed and will be returned to students. There are no fees attached to Credit Transfers.
Pathways from the qualification
Further training pathways from this qualification include, but are not limited to Certificate IV and Diploma level qualifications.
Course information flyer(s)
CDU Entry Requirements
To gain entry into UEE30811 Certificate III in Electrotechnology Electrician candidates are required to be apprentices who have entered into a Training Contract with Australian Apprenticeships NT. Students will need to demonstrate an appropriate level of language, literacy and numeracy skills and knowledge to undertake a course at this level.
This is a current, nationally accredited qualification from the UEE11 Electrotechnology Training Package.
Employability Skills are embedded in the training and assessment of national training package qualifications. Information on the Employability Skills relevant to your qualification can be obtained by visiting this website and keying in the national code for the qualification: training.gov.au
Location and study mode
Delivery at all locations is subject to sufficient demand and resources.
Locations: Alice Springs, Casuarina
Study Mode: Internal
Some components of this qualification may be available in other modes of delivery and not all modes are available at all locations.
Subject to demand other locations and modes may become available throughout the year.
Electrotechnology (Top End)
To achieve a Certificate III in Electrotechnology Electrician TWENTY (20) core units of competency totalling 920 weighting points plus elective units selected from Group B as outlined in the packaging rules and totalling 140 weighting points must be completed.
The total Nominal Hours for the sequence listed below is 1120.
|Code||Module/Unit of Competency||
|CORE UNITS OF COMPETENCY
Competencies marked # have pre-requisite competencies
|UEENEEC020B||Participate in electrical work and competency development activities||60||20|
|UEENEEE101A||Apply occupational health and safety regulations, codes and practices in the workplace||20||20|
|UEENEEE102A#||Fabricate, assemble and dismantle utilities industry components||40||40|
|UEENEEE104A#||Solve problems in d.c. circuits||80||80|
|UEENEEE105A#||Fix and secure electrotechnology equipment||20||20|
|UEENEEE107A#||Use drawings, diagrams, schedules, standards, codes and specifications||40||40|
|UEENEEE137A#||Document and apply measures to control OHS risks associated with electrotechnology work||20||20|
|UEENEEG006A#||Solve problems in single and three phase low voltage machines||80||80|
|UEENEEG033A#||Solve problems in single and three phase low voltage electrical apparatus and circuits||60||60|
|UEENEEG063A#||Arrange circuits, control and protection for general electrical installations||40||40|
|UEENEEG101A#||Solve problems in electromagnetic devices and related circuits||60||60|
|UEENEEG102A#||Solve problems in low voltage a.c. circuits||80||80|
|UEENEEG103A#||Install low voltage wiring and accessories||20||20|
|UEENEEG104A#||Install appliances, switchgear and associated accessories for low voltage electrical installations||20||20|
|UEENEEG105A#||Verify compliance and functionality of low voltage general electrical installations||40||60|
|UEENEEG106A#||Terminate cables, cords and accessories for low voltage circuits||40||40|
|UEENEEG107A#||Select wiring systems and cables for low voltage general electrical installations||60||80|
|UEENEEG108A#||Trouble-shoot and repair faults in low voltage electrical apparatus and circuits||40||80|
|UEENEEG109A#||Develop and connect electrical control circuits||80||80|
|UEENEEK142A||Apply environmental and sustainable procedures in the energy sector||20||20|
|Total nominal hours – core units||(920)||960|
ELECTIVE UNITS OF COMPETENCY (a total weighting of 140 points required)
|ELECTIVE UNITS OF COMPETENCY (Select units totalling 140 points from the following)|
|UEENEEA110A#||Assemble, mount and connect control gear and switchgear||40||120|
|UEENEEA113A#||Mount and wire control panel equipment||40||60|
|UEENEEI150A#||Develop, enter and verify discrete control programs for programmable controllers||60||60|
|*These Instrumentation units are only delivered at the Casuarina Campus in Stage 3*|
|UEENEEI101A#**||Use instrumentation drawings, specifications, standards and equipment manuals||40||40|
|UEENEEI102A#**||Solve problems in pressure measurement components and systems||40||40|
|Total nominal hours – elective units||(140)||160|
|Total nominal hours for the qualification||(1060)||1120|