Skip to main content

Vocational Education & Training

UEE30811 Certificate III in Electrotechnology Electrician

2021

Not available to international students.
Overview

UEE30811

Alice Springs, Casuarina

Estimated completion time: 4 year/s

The length of time to complete this qualification will depend on the location, study mode and selected units.
Refer to the relevant course information flyer for further information.

CDU Reference
Sector
Vocational Education & Training
Industry groups
UTILITIES
Occupation types
Electrician (General)

This qualification provides competencies to select, install, set up, test, fault find, repair and maintain electrical systems and equipment in building and premises. It includes ERAC requirements for an 'Electrician's licence'.

This qualification is only available as an Apprenticeship.

Career opportunities

Possible job titles relevant to this qualification include:

  • A Grade Electrician
  • Electrician
  • Electrical Fitter Mechanic

Credit transfers & pathways

Skills recognition

Recognition of Prior Learning (RPL)

RPL is the acknowledgement of a person's skills and knowledge acquired through previous training, work or life experience, which may be used to grant status or credit in a subject regardless of how and where they were attained, including overseas.

This can include skills from:

  • Previous study excluding courses at another VET/TAFE institution, but including courses at school or college, through adult education classes or training programs at work;
  • Work experience (including both work that is paid and unpaid); and/or
  • Life experience (for example leisure pursuits or voluntary work).

RPL is a form of assessment. It is used to determine whether a person has acquired, through formal or informal learning, the skills and experience consistent with the stated competency standards that comprise a qualification. RPL is not time referenced, so there are no parameters on how or when the skills are acquired. However, the skills that have been acquired through life experience etc., must be current and must match the elements and performance criteria contained in the individual unit.

Students seeking RPL need to indicate this on their enrolment form at the time of enrolment.

For further information please refer to the Applicant's Guide to the Recognition of Prior Learning or contact Student Central on 1800 061 963 (free call) or email Student.Central@cdu.edu.au.

Credit Transfer

Charles Darwin University as a Registered Training Organisation recognises the Australian Qualifications Framework qualifications and Statement of Attainments issued by any other Australian Registered Training Organisation.

Students are encouraged to submit any requests for credit from previous studies at the time of enrolment, to ensure they are not enrolling in units they may not need to undertake.

In order to apply for exemption/credit transfer from units completed at another training organisation, you will need to complete an Application for Exemption Form available from any campus, centre, or team, or a copy of the form can be obtained from the web.

Your completed Application for Exemption form together with attached documentary evidence (certified copy of Qualification/Statement of Attainment) to support your request for exemption/credit transfer should be submitted directly to the University either in person or by mail. Requests without documentary evidence will not be processed and will be returned to students. There are no fees attached to Credit Transfers.

Pathways

VET to Higher Education Pathway Mapping for completed Awards in the same field or discipline. <br />

Pathways from the qualification

Further training pathways from this qualification include, but are not limited to Certificate IV and Diploma level qualifications.

Entry requirements

CDU Domestic Entry Requirements

To gain entry into UEE30811 Certificate III in Electrotechnology Electrician candidates are required to be apprentices who have entered into a Training Contract with Australian Apprenticeships NT.

Students will need to demonstrate an appropriate level of language, literacy and numeracy skills and knowledge to undertake a course at this level.

  • This is a current, nationally accredited qualification from the UEE11 Electrotechnology Training Package.

  • VET for Secondary Students (VSS)

    Select VSS for more detail about this program.

    Employability skills

    Employability Skills are embedded in the training and assessment of national training package qualifications. Information on the Employability Skills relevant to your qualification can be obtained by visiting this website and keying in the national code for the qualification: training.gov.au

    Location and study mode

    Delivery at all locations is subject to sufficient demand and resources.

    Locations: Alice Springs, Casuarina

    Study Mode: On campus

    Subject to demand other locations and modes may become available throughout the year.

Contact details

Email: Student.Central@cdu.edu.au
Phone: (08) 8946 7766 or 1800 061 963 (free call)

Course structure

To achieve a UEE30811 Certificate III in Electrotechnology Electrician a total of twenty three (23) units of competency must be completed comprising twenty (20) core units and approximately three (3) elective units, depending on the units' individual point, as detailed in the packaging rules and listed below. The electives offered may vary between campuses.

The total Nominal Hours for the sequence listed below is 1120.

Code Module/Unit of Competency

Weighting Points

Hours

CORE UNITS OF COMPETENCY
Competencies marked # have pre-requisite competencies
UEENEEC020B Participate in electrical work and competency development activities 60 20
UEENEEE101A Apply occupational health and safety regulations, codes and practices in the workplace 20 20
UEENEEE102A# Fabricate, assemble and dismantle utilities industry components 40 40
UEENEEE104A# Solve problems in d.c. circuits 80 80
UEENEEE105A# Fix and secure electrotechnology equipment 20 20
UEENEEE107A# Use drawings, diagrams, schedules, standards, codes and specifications 40 40
UEENEEE137A# Document and apply measures to control OHS risks associated with electrotechnology work 20 20
UEENEEG006A# Solve problems in single and three phase low voltage machines 80 80
UEENEEG033A# Solve problems in single and three phase low voltage electrical apparatus and circuits 60 60
UEENEEG063A# Arrange circuits, control and protection for general electrical installations 40 40
UEENEEG101A# Solve problems in electromagnetic devices and related circuits 60 60
UEENEEG102A# Solve problems in low voltage a.c. circuits 80 80
UEENEEG103A# Install low voltage wiring and accessories 20 20
UEENEEG104A# Install appliances, switchgear and associated accessories for low voltage electrical installations 20 20
UEENEEG105A# Verify compliance and functionality of low voltage general electrical installations 40 60
UEENEEG106A# Terminate cables, cords and accessories for low voltage circuits 40 40
UEENEEG107A# Select wiring systems and cables for low voltage general electrical installations 60 80
UEENEEG108A# Trouble-shoot and repair faults in low voltage electrical apparatus and circuits 40 80
UEENEEG109A# Develop and connect electrical control circuits 80 80
UEENEEK142A Apply environmental and sustainable procedures in the energy sector 20 20
  Total nominal hours – core units (920) 960

ELECTIVE UNITS OF COMPETENCY (a total weighting of 140 points required)
Competencies marked # have pre-requisite competencies. 
 

ELECTIVE UNITS OF COMPETENCY (Select units totalling 140 points from the following) 
UEENEEA110A# Assemble, mount and connect control gear and switchgear 40 120
UEENEEA113A# Mount and wire control panel equipment 40 60
UEENEEI150A# Develop, enter and verify discrete control programs for programmable controllers 60 60
*These Instrumentation units are only delivered at the Casuarina Campus in Stage 3*
UEENEEI101A#** Use instrumentation drawings, specifications, standards and equipment manuals 40 40
UEENEEI102A#** Solve problems in pressure measurement components and systems 40 40
  Total nominal hours – elective units (140) 160
  Total nominal hours for the qualification (1060) 1120

 

 

Course fees

Domestic Students
2021 Indicative fees for this course:
VET Tuition Fees: $3,850.00 (for students who are eligible and receive an NT domestic subsidised place); or
Domestic Full Fees: $18.700.00 (for domestic full fee places).
Fees will vary according to your choice of units.

Please note: a limited number of NT Government subsidy places are available for eligible NT domestic students so contact us now to secure your place for 2021.

The following Fees are applicable to this course:

Domestic Students

Domestic full fees

VET full fees are applicable to this course.
2021: Information about fees for non-subsidised VET courses are available in the VET Student Guide.
 

VET tuition fees

NT Government subsidised places are available for this course.
2021: VET Tuition Fees for 2021 will be charged at $3.50 per nominal hour for subsidised training. More detailed Information about 2021 VET Tuition fees for eligible NT residents will be published in the 2021 VET Student Guide or VET Fees.

Everything you need to know to get started

How to apply for domestic students

CDU VET has several pathways for you to apply.

 

Visit How to apply for CDU VET courses for more information.

 

Admission requirements for domestic students

Before applying, you may want to check if you meet the admission requirements for studying with CDU.

 

CDU has many pathways to study, so don't worry if you don't meet the admission requirements right now. There is a study pathway to get you started on your journey.

Not sure if you are a domestic or international student?

That's OK - it can be a little tricky to know the difference.

 

To help you out, we've put together a guide to answer any questions you might have.

Everything you need to get apply

How to apply for international students

Applications to CDU must be submitted online.

 

The process is simple, all you need is a valid email address to create your online account.

 

Once you have started the application you will have the option of saving your application and resuming it at a later date.

 

There is no application fee when you apply online.

Find a CDU agent partner

Applicants may seek further information about international education in Australia from the Australian Government Department of Education and Training or from our overseas / external representatives.

 

To help with the process, we've compile a list of authorised representatives.

Not sure if you are a domestic or international student?

That's OK - it can be a little tricky to know the difference.

 

To help you out, we've put together a guide to answer any questions you might have.

 

Things like the difference between domestic and international students or the difference between course types like VET and undergraduate.