Skip to main content
Start of main content
Tradie working
TAFE

UEE32220 Certificate III in Air Conditioning and Refrigeration

Not available to international students.

Update your personalisation settings to view information about this course.

This course is only available to Domestic students and your preference is currently set to International.

This course is only available to International students and your preference is currently set to Domestic.

Key details

Duration

4 year/s

This program is delivered over a period of 4 - 6 years. The length of time to complete this qualification will depend on the location, study mode and/or units selected and will vary depending upon how long a student takes to reach the required competency level.

Intake

Locations

Casuarina
Not available to international students.

Course code

UEE32220

Overview



This qualification covers competencies to select components, install, set up, test, fault find, repair and maintain refrigeration systems and equipment that apply to food storage and preservation, and air conditioning and air distribution equipment in buildings and premises. It includes regulatory requirements for purchasing and handling refrigerants.

Competency development activities in this qualification are subject to regulations directly related to licencing. A relevant contract of training through an apprenticeship or relevant employment may be required to enable the application of the required knowledge and skills to on the job work activities and environments.

Refrigerant Handling Licence:

The achievement of the qualification meets the training components for the full national Refrigerant Handling Licence which is required to work on refrigeration and air conditioning equipment that carries the risk of a fluorocarbon refrigerant being emitted while decanting the refrigerant or manufacturing, installing, commissioning, servicing, maintaining or decommissioning refrigeration and air conditioning equipment.

Refrigeration and Air Conditioning Occupational Licence:

Additional and/or other conditions may apply in some jurisdictions subject to regulations related to refrigeration/air conditioning work. Practice in the workplace and during training is also subject to work health and safety (WHS)/occupational health and safety (OHS) regulations.

Electrical Occupation Licence:

The achievement of this qualification with the core restricted electrical units meet the electrical regulatory requirements for related restricted electrical work in most state/territories. This is required to work on electrical installations which are designed to operate at voltages greater than 50 volt (V) alternating current (a.c.) or 120 V direct current (d.c.).

Career opportunities

Occupations relevant to this qualification in industry sectors such as Electrotechnology include:

>Air Conditioning Technician

>Air Conditioning and Mechanical Services Technician

>Refrigeration Mechanic

Credit transfers and advanced standing

Skill recognition

Recognition of Prior Learning (RPL)

RPL is the acknowledgement of a person's skills and knowledge acquired through previous training, work or life experience, which may be used to grant status or credit in a subject regardless of how and where they were attained, including overseas.This can include skills from:

  • Previous study excluding courses at another VET/TAFE institution, but including courses at school or college, through adult education classes or training programs at work;
  • Work experience (including both work that is paid and unpaid); and/or
  • Life experience (for example leisure pursuits or voluntary work).

RPL is a form of assessment. It is used to determine whether a person has acquired, through formal or informal learning, the skills and experience consistent with the stated competency standards that comprise a qualification. RPL is not time referenced, so there are no parameters on how or when the skills are acquired. However, the skills that have been acquired through life experience etc., must be current and must match the elements and performance criteria contained in the individual unit.

Students seeking RPL need to indicate this on their enrolment form at the time of enrolment.

For further information please refer to the Applicant's Guide to the Recognition of Prior Learning or contact Student Central on 1800 061 963 (free call) or email Student.Central@cdu.edu.au.

Credit Transfer

Charles Darwin University as a Registered Training Organisation recognises the Australian Qualifications Framework qualifications and Statement of Attainments issued by any other Australian Registered Training Organisation.

Students are encouraged to submit any requests for credit from previous studies at the time of enrolment, to ensure they are not enrolling in units they may not need to undertake.

In order to apply for exemption/credit transfer from units completed at another training organisation, you will need to complete an Application for Exemption Form available from any campus, centre, or team, or a copy of the form can be obtained from the web.

Your completed Application for Exemption form together with attached documentary evidence (certified copy of Qualification/Statement of Attainment) to support your request for exemption/credit transfer should be submitted directly to the University either in person or by mail. Requests without documentary evidence will not be processed and will be returned to students. There are no fees attached to Credit Transfers.

Pathways

VET to Higher Education Pathway Mapping for completed Awards in the same field or discipline.

Further training pathways from this qualification include but are not limited to UEE42920 Certificate IV in Refrigeration and Air Conditioning Systems.

Fees

2024 Fees

  Fee Type  2024 Course Fees
  NT Government supported*  $4,403.00
  Full Fee  $14,875.00

*This course is supported by the NT Government for eligible domestic students who are NT residents. A limited number of NT Government supported places are available, so secure your place now.

Fees shown are indicative and subject to change annually. Actual course fees may vary depending on the units chosen. International non-student visa-holders; study eligibility needs to be verified before enrolment. Fees may vary depending on the visa type.

For further clarification and information on fees, payment options, instalment plans, and refunds, contact CDU on 1800 061 963 or refer to TAFE Fees and Payments.

Fee exemptions

Exemptions apply to TAFE tuition fees for NTG supported courses only.

At the time of enrolment, students in these categories will be exempt from paying tuition fees:

  • Recipient of a Centrelink payment
  • Recipient of Department of Veterans Affairs benefits
  • Enrolled Secondary Students
  • Permanent residents with refugee or humanitarian status

Certified copy of the evidence must be provided at the time of enrolment.

If your course is delivered in a location that is listed on the NTG’s Location Categories for VET Funded Programs, with remote as the location category you may be eligible for the Remote 2 Location tuition fee exemption.

Delivery allowance for VET funded programs

International VET Package

Course information flyer(s)

CDU trades student

Why study trades at CDU?

Whether you're an apprentice, a trainee, or already working in the industry, our trades courses are for you.

Start your career or upskill in a variety of areas from construction and electrotechnology to plumbing and metal trades. Wherever your interest lies, you'll learn from experts with industry-standard technologies and tools so you can graduate workplace ready.

  • NT's largest training provider
  • Access to specialised trade training facilities
  • Recognition of prior learning so you can qualify faster
VET-palmerston-cookery-flipped

Why study at CDU?

Study with the Northern Territory's largest training provider and gain industry-ready skills and experience.

  • Access to first-class facilities
  • Recognition of prior learning accepted
  • Packages into higher education available for most courses
CDU trades student

Why study trades at CDU?

Whether you're an apprentice, a trainee, or already working in the industry, our trades courses are for you.

Start your career or upskill in a variety of areas from construction and electrotechnology to plumbing and metal trades. Wherever your interest lies, you'll learn from experts with industry-standard technologies and tools so you can graduate workplace ready.

  • NT's largest training provider
  • Access to specialised trade training facilities
  • Recognition of prior learning so you can qualify faster
VET-palmerston-cookery-flipped

Why study at CDU?

Study with the Northern Territory's largest training provider and gain industry-ready skills and experience.

  • Access to first-class facilities
  • Recognition of prior learning accepted
  • Packages into higher education available for most courses

What will I study?

To achieve UEE32220 Certificate III in Air Conditioning and Refrigeration a total of 1210 weighting points must be completed comprising 1070 core weightings points plus 140 general elective weighting points as detailed in the packing rules and listed below. The electives offered may vary between campuses.The total weighting points for the sequence listed below is 1190

Course structure

To achieve UEE32220 Certificate III in Air Conditioning and Refrigeration a total of 1210 weighting points must be completed comprising 1070 core weightings points plus 140 general elective weighting points as detailed in the packing rules and listed below. The electives offered may vary between campuses.

The total weighting points for the sequence listed below is 1190

CodeModule/Unit of CompetencyWeighting PointsNominal Hours
CORE UNITS OF COMPETENCY
Competencies marked * have pre-requisite competencies
UEECD0007Apply work health and safety regulations, codes and practices in the workplace2020
UEECD0016Document and apply measures to control WHS risks associated with electrotechnology work*2020
UEECD0019Fabricate, assemble and dismantle utilities industry components*4040
UEECD0020Fix and secure electrotechnology equipment*2020
UEECD0042Solve problems in ELV single path circuits*4040
UEECD0051Use drawings, diagrams, schedules, standards, codes and specifications*4040
UEECO0010Participate in refrigeration and air conditioning work and competency development activities6020
UEERA0031Diagnose and rectify faults in air conditioning and refrigeration control systems*6080
UEERA0035Establish the basic operating conditions of air conditioning systems*2020
UEERA0036Establish the basic operating conditions of vapour compression systems*6060
UEERA0044Find and rectify faults in single phase motors and associated controls*4040
UEERA0045Find and rectify faults in three phase motors and associated controls*3030
UEERA0050Install refrigerant pipe work, flow controls and accessories*6060
UEERA0051Install, commission, service and maintain air conditioning systems*8080
UEERA0052Install, commission, service and maintain low temperature systems*4040
UEERA0053Install, commission, service and maintain medium temperature systems*6040
UEERA0059Prepare and connect refrigerant tubing and fittings*4040
UEERA0062Recover and charge refrigerants*4040
UEERA0079Safely handle refrigerants and lubricants*4040
UEERA0081Select refrigerant piping, accessories and associated controls*4060
UEERA0092Solve problems in low voltage refrigeration and air conditioning circuits*4060
UEERA0094Verify functionality and compliance of refrigeration and air conditioning installations*4040
UEERE0001Apply environmentally and sustainable procedures in the energy sector2020
UEERL0001Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply*2020
UEERL0002Attach cords, cables and plugs to electrical equipment for connection to 1000 V a.c. or 1500 V d.c.*2020
UEERL0004Disconnect - reconnect electrical equipment connected to low voltage (LV) installation wiring*6060
UEERL0005Locate and rectify faults in low voltage (LV) electrical equipment using set procedures*2020
 Total nominal hours - core units10701070
ELECTIVE UNITS OF COMPETENCY (140 weighting points required)
Competencies marked * have pre-requisite competencies.  
ELECTIVE UNITS GROUP A
HLTAID009Provide cardiopulmonary resuscitation104
UETDRMP007Perform rescue from a live low voltage panel*206
ELECTIVE UNITS GROUP B (minimum 110 pts required)
UEEIC0013Develop, enter and verify discrete control programs for programmable controllers*6060
UEERA0005Apply safety awareness and legal requirements for ammonia refrigerant1010
UEERA0006Apply safety awareness and legal requirements for carbon dioxide refrigerant1010
UEERA0007Apply safety awareness and legal requirements for flammable refrigerants1010
UEERA0084Service and repair self-contained flammable refrigerants air conditioning and refrigeration systems*2020
 Total nominal hours - elective units140120
 Total nominal hours for this qualification12101190

 

 

Entry requirements

Admission criteria

To ensure you have the right skills and support to succeed in your course, a Language, Literacy, and Numeracy (LL&N) evaluation helps identify any areas where you may need additional support to help you achieve your goals.

To gain entry into UEE32220 Certificate III in Air Conditioning and Refrigeration candidates are required to:

  • Be an Apprentice who has entered a Training Contract with their employer and Australian Apprenticeship Support Network NT.


All of my lecturers were top notch former tradies with a solid grasp of what they were teaching. Whatever my issue was, they were always there for me. It was great.

Yron

CDU student

Yron VET Trades

All of my lecturers were top notch former tradies with a solid grasp of what they were teaching. Whatever my issue was, they were always there for me. It was great.

Yron

CDU student

Yron VET Trades

Course details

Accreditation

This is a current, nationally accredited qualification from the UEE Electrotechnology Training Package .

Employability skills

Employability Skills are embedded in the training and assessment of national training package qualifications. Information on the Employability Skills relevant to your qualification can be obtained by visiting this website and keying in the national code for the qualification: training.gov.au

Location and study mode

Delivery at all locations is subject to sufficient demand and resources.



Locations:Casuarina



Study Mode:On campus, workplace assessment



Subject to demand other locations and modes may become available throughout the year.

Additional information

Sector
TAFE
Industry groups
UTILITIES
Occupation types
Airconditioning And Refrigeration Mechanic
Area of study
Electrotechnology

Contact details

Electrotechnology and Plumbing
Location: Casuarina & Alice Springs Campuses
Phone: 08 8946 7505 (CAS) 08 8959 5363 (ASP)
Email: vet.electro@cdu.edu.au

You make CDU

Together we are a positive force for change in our communities and the world.

You make CDU

Our students choose to study with us because we share the same vision – to make a positive change. Whatever your motivation is, we can guide you in the right direction.

You make CDU

Together we are a positive force for change in our communities and the world.

You make CDU

Our students choose to study with us because we share the same vision – to make a positive change. Whatever your motivation is, we can guide you in the right direction.

How to apply

How to apply for domestic students

CDU TAFE has several pathways for you to apply.

 

Visit How to apply for CDU TAFE courses for more information.

 

Admission requirements for domestic students

Before applying, you may want to check if you meet the admission requirements for studying with CDU.

 

CDU has many pathways to study, so don't worry if you don't meet the admission requirements right now. There is a study pathway to get you started on your journey.

Not sure if you are a domestic or international student?

That's OK - it can be a little tricky to know the difference.

 

To help you out, we've put together a guide to answer any questions you might have.

How to apply for international students

Applications to CDU must be submitted online.

 

The process is simple, all you need is a valid email address to create your online account.

 

Once you have started the application you will have the option of saving your application and resuming it at a later date.

 

There is no application fee when you apply online.

Find a CDU agent partner

Applicants may seek further information about international education in Australia from the Australian Government Department of Education and Training or from our overseas / external representatives.

 

To help with the process, we've compile a list of authorised representatives.

Not sure if you are a domestic or international student?

That's OK - it can be a little tricky to know the difference.

 

To help you out, we've put together a guide to answer any questions you might have.

 

Things like the difference between domestic and international students or the difference between course types like TAFE and undergraduate.

We are here to help

Submit an enquiry and our friendly team will be in touch.

You can unsubscribe at any time. See our privacy notice.
Back to top