Update your personalisation settings to view information about this course.
This course is only available to Domestic students and your preference is currently set to International.
This course is only available to International students and your preference is currently set to Domestic.
Key details
Duration
This program is delivered over a period of 2 days full-time. The length of time to complete this qualification will depend on the location, study mode and/or units selected and will vary depending upon how long a student takes to reach the required competency level.
Intake
Locations
Entry requirements
View full entry requirementsCourse code
Overview
Availability: Applications are open for 2026.
Online Application: This course is available for online application.
This course specifies the skills and knowledge required to test, commission and maintain hot and/or heated water temperature control devices, including thermostatic mixing valves in water services.
In some jurisdictions, this unit of competency may form part of accreditation, licensing, legislative, regulatory or certification requirements.
| Delivery Details | |
| Location | Casuarina |
| Duration | 2 days full-time *Duration may vary depending on how long a student takes to reach the required competency level |
| Study Mode | Face-to-face *Information relating to study modes can be found in the 2026 TAFE Student Guide |
Credit transfers and advanced standing
Skill recognition
Skills recognition is not applicable to this course. CDU's short courses are highly targeted courses designed to help you improve a specific skill. They will help you improve your career prospects, maintain currency in your field, or allow you to try out something completely new.
Pathways
VET to Higher Education Pathway Mapping for completed Awards in the same field or discipline.
Fees
2026 Fees
| Fee Type | 2026 Course Fees |
| NT Government supported* | Not available for this course |
| Flat Fee | $756.00 |
Fees shown are indicative and subject to change annually. Actual course fees may vary depending on the units chosen. International non-student visa-holders; study eligibility needs to be verified before enrolment. Fees may vary depending on the visa type.
For further clarification and information on fees, payment options, instalment plans, and refunds, contact CDU on 1800 061 963 or refer to TAFE Fees and Payments.
International VET Package
Course information flyer(s)
Why study at CDU?
Whether you learn on campus or online, you will be studying with a proud multi-sector university that’s a leader in research and flexible study delivery. CDU is innovative, industry-relevant and student-centred. Our students are at the heart of all that we do.
- Benefit from smaller class sizes for more personalised attention
- Online learners receive the same support as their on-campus peers
- Enjoy inclusive, welcoming learning environments
- Utilise our deep connections with industry, businesses and communities in the Northern Territory, across Australia, and beyond
Why study at CDU?
Whether you learn on campus or online, you will be studying with a proud multi-sector university that’s a leader in research and flexible study delivery. CDU is innovative, industry-relevant and student-centred. Our students are at the heart of all that we do.
- Benefit from smaller class sizes for more personalised attention
- Online learners receive the same support as their on-campus peers
- Enjoy inclusive, welcoming learning environments
- Utilise our deep connections with industry, businesses and communities in the Northern Territory, across Australia, and beyond
What will I study?
To achieve the vocational training program VTP407 - Thermostatic Mixing Valves (TMV) Devices a total of three (3) units of competency must be completed as listed below.
Course structure
Students will be issued with a Statement of Attainment upon successful completion.
The total Nominal Hours for this training program is 105.
| Code | Module/Unit of Competency | Hours |
| UNITS OF COMPETENCY | ||
| CPCPWT4023 | Commission and maintain hot and heated water temperature control devices* | 20 |
| CPCPCM2043 | Carry out WHS requirements | 50 |
| CPCPWT3022 | Install and commission water heating systems and adjust controls and devices | 35 |
| Total nominal hours for the training program | 105 | |
*Pre-requisite units for CPCPWT4023 are:
- CPCPCM2043 Carry out WHS requirements
- CPCPWT3022 Install and commission water heating systems and adjust controls and devices
Entry requirements
Admission criteria
A Language, Literacy, Numeracy and Digital Literacy (LLND) evaluation helps identify any areas where you may need additional support to help you achieve your goals.
To gain entry into VTP407 Thermostatic Mixing Valves (TMV) Devices, candidates require:
- CPC32420 Certificate III in Plumbing or industry equivalent
- NT White Card
- Must have completed pre-requisite units for CPCWT4023
- CPCPCM2043 Carry out WHS requirements
- CPCPWT3022 Install and commission water heating systems and adjust controls and devices
- Sufficient level of literacy and numeracy
Students are required to wear PPE (personal protective equipment)
The people-first approach to flexibility and supportive learning environment at CDU meant I could find a balance with study, work and family life.
Nikki
CDU student
CDU graduates have the best career and employment prospects. International students have ranked CDU 1st in Australia for learning and living experience
Hema
CDU student
The people-first approach to flexibility and supportive learning environment at CDU meant I could find a balance with study, work and family life.
Nikki
CDU student
CDU graduates have the best career and employment prospects. International students have ranked CDU 1st in Australia for learning and living experience
Hema
CDU student
Course details
Accreditation
This is a non-award course and a Statement of Attainment will be issued for nationally recognised units of competency successfully completed.
Location and study mode
Delivery at all locations is subject to sufficient demand and resources.
Locations: Casuarina
Study Mode: On campus
Subject to demand other locations and modes may become available throughout the year.
Additional information
Contact details
Electrotechnology and Plumbing |
You make CDU
Together we are a positive force for change in our communities and the world.
You make CDU
Our students choose to study with us because we share the same vision – to make a positive change. Whatever your motivation is, we can guide you in the right direction.
You make CDU
Together we are a positive force for change in our communities and the world.
You make CDU
Our students choose to study with us because we share the same vision – to make a positive change. Whatever your motivation is, we can guide you in the right direction.
How to apply
How to apply direct to CDU
Applications to CDU must be submitted online.
You will need a valid email address to create your online account.
Once you have started the application you will have the option of saving your application and resuming it at a later date.
There is no application fee when you apply online.
Find a CDU agent partner to help you apply
Applicants may seek further information about international education in Australia from theAustralian Government Department of Education and Training or from our overseas / external representatives.
To help with the process, we've compile a list of authorised representatives.
Not sure if you are a domestic or international student?
That's OK - it can be a little tricky to know the difference.
To help you out, we've put together a guide to answer any questions you might have.
Things like the difference between domestic and international students or the difference between course types like VET and undergraduate.
Share this course