Skip to main content
Start of main content
Transport and logistics at CDU
TAFE

MAR20321 Certificate II in Maritime Operations (Coxswain Grade 1 Near Coastal)

Not available to international students.

Update your personalisation settings to view information about this course.

This course is only available to Domestic students and your preference is currently set to International.

This course is only available to International students and your preference is currently set to Domestic.

Key details

Duration

1 year/s

This program is delivered over a period of 6 to 12 months. The length of time to complete this qualification will depend on the location, study mode and/or units selected and will vary depending upon how long a student takes to reach the required competency level.

Intake

Locations

Casuarina
Not available to international students.

Course code

MAR20321

Overview



This qualification applies to people working in the maritime industry seeking an Australian Maritime Safety Authority (AMSA) certificate of competency to command and operate the engines of a vessel:

  • <12 m in length
  • with propulsion power that is unlimited for an outboard engine or <500 kW for an inboard engine
  • that is in inshore waters or designated waters

or

  • as a tender or auxiliary vessel within 3 nautical miles (nm) of a parent vessel within the exclusive economic zone (EEZ)

Career opportunities

Possible occupations relevant to this qualification include:

  • Ferry coxswain
  • Fishing tour guide
  • Crew boat coxswain

 

Credit transfers and advanced standing

Skill recognition

Recognition of Prior Learning (RPL)

RPL is the acknowledgement of a person's skills and knowledge acquired through previous training, work or life experience, which may be used to grant status or credit in a subject regardless of how and where they were attained, including overseas.This can include skills from:

  • Previous study excluding courses at another VET/TAFE institution, but including courses at school or college, through adult education classes or training programs at work;
  • Work experience (including both work that is paid and unpaid); and/or
  • Life experience (for example leisure pursuits or voluntary work).

RPL is a form of assessment. It is used to determine whether a person has acquired, through formal or informal learning, the skills and experience consistent with the stated competency standards that comprise a qualification. RPL is not time referenced, so there are no parameters on how or when the skills are acquired. However, the skills that have been acquired through life experience etc., must be current and must match the elements and performance criteria contained in the individual unit.

Students seeking RPL need to indicate this on their enrolment form at the time of enrolment.

For further information please refer to the Applicant's Guide to the Recognition of Prior Learning or contact Student Central on 1800 061 963 (free call) or email Student.Central@cdu.edu.au.

Credit Transfer

Charles Darwin University as a Registered Training Organisation recognises the Australian Qualifications Framework qualifications and Statement of Attainments issued by any other Australian Registered Training Organisation.

Students are encouraged to submit any requests for credit from previous studies at the time of enrolment, to ensure they are not enrolling in units they may not need to undertake.

In order to apply for exemption/credit transfer from units completed at another training organisation, you will need to complete an Application for Exemption Form available from any campus, centre, or team, or a copy of the form can be obtained from the web.

Your completed Application for Exemption form together with attached documentary evidence (certified copy of Qualification/Statement of Attainment) to support your request for exemption/credit transfer should be submitted directly to the University either in person or by mail. Requests without documentary evidence will not be processed and will be returned to students. There are no fees attached to Credit Transfers.

Pathways

VET to Higher Education Pathway Mapping for completed Awards in the same field or discipline.

Further training pathways from this qualification include but are not limited to MAR30921 Certificate III in Maritime Operations (Master up to 24 metres Near Coastal) (CDU does not deliver)

Fees

2024 Fees

  Fee Type  2024 Course Fees
  Fee Free TAFE*  Free
  Full Fee  $6,162.50

*This course is part of the Fee Free TAFE initiative. Fee Free TAFE and vocational education and training is a joint initiative of the Northern Territory Government and Australian Governments providing tuition-free training places to students wanting to train, retain or upskill.

Fee free places are available for eligible domestic students who are NT residents, limited places are available, so secure your place now.

Fees shown are indicative and subject to change annually. Actual course fees may vary depending on the units chosen. International non-student visa-holders; study eligibility needs to be verified before enrolment. Fees may vary depending on the visa type.

For further clarification and information on fees, payment options, instalment plans, and refunds, contact CDU on 1800 061 963 or refer to TAFE Fees and Payments.

CDU Aquaculture students

Why study at CDU?

Study with the Territory's largest training provider and gain industry-ready skills and experience. Whether you're a high school student or a working professional, we've got the courses and qualifications you want plus the support and flexibility you need to succeed. 

  • Learn from expert lecturers and industry professionals
  • Access to first-class facilities
  • Recognition of prior learning to qualify faster
VET-palmerston-cookery-flipped

Why study at CDU?

Study with the Northern Territory's largest training provider and gain industry-ready skills and experience.

  • Access to first-class facilities
  • Recognition of prior learning accepted
  • Packages into higher education available for most courses
CDU Aquaculture students

Why study at CDU?

Study with the Territory's largest training provider and gain industry-ready skills and experience. Whether you're a high school student or a working professional, we've got the courses and qualifications you want plus the support and flexibility you need to succeed. 

  • Learn from expert lecturers and industry professionals
  • Access to first-class facilities
  • Recognition of prior learning to qualify faster
VET-palmerston-cookery-flipped

Why study at CDU?

Study with the Northern Territory's largest training provider and gain industry-ready skills and experience.

  • Access to first-class facilities
  • Recognition of prior learning accepted
  • Packages into higher education available for most courses

What will I study?

To achieve MAR20321 Certificate II in Maritime Operations a total of thirteen (13) Core units of competency must be completed as detailed in the packaging rules and listed below. The total nominal hours for the sequence listed below is 493.

Course structure

To achieve MAR20321 Certificate II in Maritime Operations a total of thirteen (13) Core units of competency must be completed as detailed in the packaging rules and listed below.



The total nominal hours for the sequence listed below is 493.

CodeModule/Unit of CompetencyHours
Core units of competency
HLTAID011Provide First Aid18
MARB027Perform basic servicing and maintenance of main propulsion unit and auxiliary systems40
MARC037Operate inboard and outboard motors35
MARC038Operate main propulsion unit and auxiliary systems30
MARF027Apply basic survival skills in the event of vessel abandonment35
MARF028Follow procedures to minimise and fight fires on board a vessel30
MARF029Meet work health and safety requirements30
MARF030Survive at sea using survival craft15
MARH013Plan and navigate a passage for a vessel up to 12 metres50
MARI003Comply with regulations to ensure safe operation of a vessel up to 12 metres40
MARJ006Follow environmental work practices35
MARK007Handle a vessel up to 12 metres80
MARN008Apply seamanship skills aboard a vessel up to 12 metres55
 Total nominal hours for the qualification493



 

Entry requirements

Admission criteria

To ensure you have the right skills and support to succeed in your course, a Language, Literacy, and Numeracy (LL&N) evaluation helps identify any areas where you may need additional support to help you achieve your goals.

It is a CDU requirement that students have completed at least half of the applicable sea service before commencement of the course.

This qualification is required to obtain an AMSA certificate of competency as a Coxswain Grade 1 NC as defined in the National Standard for Commercial Vessels (NSCV) Part D.

AMSA certification will require:

  • achieving MAR20321 Certificate II in Maritime Operations (Coxswain Grade 1 Near Coastal)
  • a Marine Radio Operators VHF Certificate of Proficiency
  • sea service consisting of 30 days qualifying sea service and a completed AMSA approved task book OR 240 days of qualifying sea service
  • meeting the medical and eyesight requirements specified in the NSCV Part D and
  • assessment by an AMSA approved assessor using the AMSA mandated practical assessment (AMPA) conducted on a commercial vessel >5.0m in length

All of my lecturers were top notch former tradies with a solid grasp of what they were teaching. Whatever my issue was, they were always there for me. It was great.

Yron

CDU student

Yron VET Trades

All of my lecturers were top notch former tradies with a solid grasp of what they were teaching. Whatever my issue was, they were always there for me. It was great.

Yron

CDU student

Yron VET Trades

Course details

Accreditation

This is a current, nationally accredited qualification from the MAR Maritime Training Package.

Employability skills

Employability Skills are embedded in the training and assessment of national training package qualifications. Information on the Employability Skills relevant to your qualification can be obtained by visiting this website and keying in the national code for the qualification: training.gov.au

Location and study mode

Delivery at all locations is subject to sufficient demand and resources.



Locations: Casuarina



Study Mode: On campus, workplace assessment



Subject to demand other locations and modes may become available throughout the year.

Additional information

Sector
TAFE
Industry groups
TRANSPORT AND STORAGE
Occupation types
Ship'S Master
Area of study
Transport and Logistics, Aquaculture

Contact details

Automotive, Transport and Civil
Location: Casuarina & Alice Springs Campuses
Phone: 08 8946 7506 (CAS) 08 8959 5363 (ASP) Student Central 1800 061 963
Email: vet.autocivil@cdu.edu.au

You make CDU

Together we are a positive force for change in our communities and the world.

You make CDU

Our students choose to study with us because we share the same vision – to make a positive change. Whatever your motivation is, we can guide you in the right direction.

You make CDU

Together we are a positive force for change in our communities and the world.

You make CDU

Our students choose to study with us because we share the same vision – to make a positive change. Whatever your motivation is, we can guide you in the right direction.

How to apply

How to apply for domestic students

CDU TAFE has several pathways for you to apply.

 

Visit How to apply for CDU TAFE courses for more information.

 

Admission requirements for domestic students

Before applying, you may want to check if you meet the admission requirements for studying with CDU.

 

CDU has many pathways to study, so don't worry if you don't meet the admission requirements right now. There is a study pathway to get you started on your journey.

Not sure if you are a domestic or international student?

That's OK - it can be a little tricky to know the difference.

 

To help you out, we've put together a guide to answer any questions you might have.

How to apply for international students

Applications to CDU must be submitted online.

 

The process is simple, all you need is a valid email address to create your online account.

 

Once you have started the application you will have the option of saving your application and resuming it at a later date.

 

There is no application fee when you apply online.

Find a CDU agent partner

Applicants may seek further information about international education in Australia from the Australian Government Department of Education and Training or from our overseas / external representatives.

 

To help with the process, we've compile a list of authorised representatives.

Not sure if you are a domestic or international student?

That's OK - it can be a little tricky to know the difference.

 

To help you out, we've put together a guide to answer any questions you might have.

 

Things like the difference between domestic and international students or the difference between course types like TAFE and undergraduate.

We are here to help

Submit an enquiry and our friendly team will be in touch.

You can unsubscribe at any time. See our privacy notice.
Back to top