Update your personalisation settings to view information about this course.
This course is only available to Domestic students and your preference is currently set to International.
This course is only available to International students and your preference is currently set to Domestic.
Key details
Duration
This course can typically be completed within 4 years.
* The actual duration may vary depending on where and how you study, the units you choose, and the time needed to demonstrate the required skills and knowledge.
Intake
Locations
Entry requirements
View full entry requirementsCourse code
Overview
Availability:Applications for 2027 are now open.
Online Application: This course is not available for online applications. Please contact the team on the details below for further information on how to apply.
Apprenticeships/Traineeships: This course can be undertaken as an apprenticeship. Visit TAFE Apprenticeships and Traineeships for more information.
This qualification provides individuals with the skills and knowledge to select, install, set up, test, fault find, repair and maintain electrical systems and equipment in buildings and premises. It includes Electrical Regulatory Authority Council (ERAC), or their successor-s, Essential Performance Capabilities for an `Unrestricted Electrician-s license-.
The skills and knowledge described in this qualification require a licence or permit to practice in the workplace where work is carried out on electrical installations which are designed to operate at voltages greater than 50 volts (V) alternating current (a.c.) or 120 V direct current (d.c.).
Competency development activities in this qualification are subject to regulations directly related to licensing. Where a licence or permit to practice is not held, a relevant contract of training through an Australian Apprenticeship, may be required. To obtain an Unrestricted Electrician-s Licence in most jurisdictions the qualification must be completed as an apprenticeship or Trades Recognition Australia (TRA) pathway.
Where required for Licencing, the certification documentation issued must indicate if the qualification was completed as an apprenticeship or Trades Recognition Australia (TRA) pathway.
| Delivery Details | |
| Location | Casuarina Alice Springs |
| Duration | 4 years * Course duration may vary depending on the time required to achieve the required competencies. |
| Study Mode | Face-to-face Simulated workplace Industry practice * Information about study modes are available in the 2027 TAFE Student Guide. |
| Start Date | January 11, 2027 - December 10, 2027 *Apprentices will receive an individual call-up notification letter. *Your start date will be determined in consultation with the delivery team. |
| Attendance | Block delivery Monday - Friday |
Career opportunities
After completing this course, you may be able to work in roles such as:
- Electrician
- Electrical fitter mechanic
- A grade electrician
Credit transfers and advanced standing
Skill recognition
Recognition of Prior Learning (RPL)
Recognition of Prior Learning (RPL) recognises skills and knowledge gained through previous study, work experience, volunteering, or life experience. If your existing skills and knowledge meet the requirements of a unit of competency, you may be eligible to receive credit towards your qualification. If you would like to apply for RPL, please indicate this when completing your enrolment form. For more information, please contact CDU TAFE Student Services on 08 8946 7111, or email TAFE@cdu.edu.au.
Credit Transfer
If you have completed the same, or an equivalent, unit through another Australian Registered Training Organisation (RTO), you may be eligible for a credit transfer. To apply, submit a completed Application for Credit Transfer Form and supporting documentation. Applications are encouraged at the time of enrolment. There is no fee for credit transfer applications.
Pathways
VET to Higher Education Pathway Mapping for completed Awards in the same field or discipline.
Fees
2027 Fees
| Fee Type | 2027 Course Fees |
| NT Government supported* | $4,463.50 - $5,174.50 |
| Full Fee | $16,622.30 - $19,270.10 |
Eligible domestic students who are NT residents may be able to study this course with Northern Territory Government support. Places are limited, so apply early.
Read the eligibility requirements to check if you-re eligible.
Fees shown are indicative and subject to change annually. Actual course fees may vary depending on the units chosen. International non-student visa-holders; study eligibility needs to be verified before enrolment. Fees may vary depending on the visa type.
For further clarification and information on fees, payment options, instalment plans, and refunds, contact CDU on 1800 061 963 or refer to TAFE Fees and Payments.
Fee exemptions
Exemptions apply to TAFE tuition fees for NTG supported courses only.
At the time of enrolment, students in these categories will be exempt from paying tuition fees:
- Hold a current Centrelink Concession or Healthcare card
- Hold a Veteran's Healthcare card
- Enrolled Secondary Students
- Hold a permanent resident visa with Refugee or Humanitarian status
Certified copy of the evidence must be provided at the time of enrolment.
If your course is delivered in a location that is listed on the NTG's Location Categories for VET Funded Programs, with remote as the location category you may be eligible for the Remote 2 Location tuition fee exemption.
International VET Package
Course information flyer(s)

Why study trades at CDU?
Whether you're an apprentice, a trainee, or already working in the industry, our trades courses are for you.
Start your career or upskill in a variety of areas from construction and electrotechnology to plumbing and metal trades. Wherever your interest lies, you'll learn from experts with industry-standard technologies and tools so you can graduate workplace ready.
- NT's largest training provider
- Access to specialised trade training facilities
- Recognition of prior learning so you can qualify faster

Why study at CDU?
Study with the Northern Territory's largest training provider and gain industry-ready skills and experience.
- Access to first-class facilities
- Recognition of prior learning accepted
- Packages into higher education available for most courses

Why study trades at CDU?
Whether you're an apprentice, a trainee, or already working in the industry, our trades courses are for you.
Start your career or upskill in a variety of areas from construction and electrotechnology to plumbing and metal trades. Wherever your interest lies, you'll learn from experts with industry-standard technologies and tools so you can graduate workplace ready.
- NT's largest training provider
- Access to specialised trade training facilities
- Recognition of prior learning so you can qualify faster

Why study at CDU?
Study with the Northern Territory's largest training provider and gain industry-ready skills and experience.
- Access to first-class facilities
- Recognition of prior learning accepted
- Packages into higher education available for most courses
What will I study?
To achieve UEE30820 Certificate III in Electrotechnology Electrician a total of 1,110 weighting points must be completed comprising 990 core plus 120 general elective weighting points as detailed in the packaging rules and listed below. The electives offered may vary between campuses.The total weighting points for the sequence listed below is 1130 - 1310.
Course structure
To achieve UEE30820 Certificate III in Electrotechnology Electrician a total of 1,110 weighting points must be completed comprising 990 core plus 120 general elective weighting points as detailed in the packaging rules and listed below. The electives offered may vary between campuses.
The total weighting points for the sequence listed below is 1130 - 1310.
| Code | Module/Unit of Competency | Weighting Points | NominalHours |
| CORE UNITS OF COMPETENCY Competencies marked * have pre-requisite competencies | |||
| HLTAID009 | Provide cardiopulmonary resuscitation | 10 | 4 |
| UEECD0007 | Apply work health and safety regulations, codes and practices in the workplace | 20 | 20 |
| UEECD0016 | Document and apply measures to control WHS risks associated with electrotechnology work* | 20 | 20 |
| UEECD0019 | Fabricate, assemble and dismantle utilities industry components* | 40 | 40 |
| UEECD0020 | Fix and secure electrotechnology equipment* | 20 | 20 |
| UEECD0044 | Solve problems in multiple path circuits* | 40 | 40 |
| UEECD0046 | Solve problems in single path circuits* | 40 | 40 |
| UEECD0051 | Use drawings, diagrams, schedules, standards, codes and specifications* | 40 | 40 |
| UEECO0023 | Participate in electrical work and competency development activities | 60 | 20 |
| UEEEL0003 | Arrange circuits, control and protection for electrical installations* | 40 | 40 |
| UEEEL0005 | Develop and connect electrical control circuits* | 80 | 80 |
| UEEEL0008 | Evaluate and modify low voltage heating equipment and controls* | 20 | 20 |
| UEEEL0009 | Evaluate and modify low voltage lighting circuits, equipment and controls* | 20 | 20 |
| UEEEL0010 | Evaluate and modify low voltage socket outlets circuits* | 20 | 20 |
| UEEEL0012 | Install low voltage wiring, appliances, switchgear and associated accessories* | 40 | 40 |
| UEEEL0014 | Isolate, test and troubleshoot low voltage electrical circuits* | 60 | 80 |
| UEEEL0018 | Select wiring systems and select cables for low voltage electrical installations* | 60 | 80 |
| UEEEL0019 | Solve problems in direct current (d.c.) machines* | 30 | 30 |
| UEEEL0020 | Solve problems in low voltage a.c. circuits* | 80 | 80 |
| UEEEL0021 | Solve problems in magnetic and electromagnetic devices* | 30 | 30 |
| UEEEL0023 | Terminate cables, cords and accessories for low voltage circuits* | 40 | 40 |
| UEEEL0024 | Test and connect alternating current (a.c.) rotating machines* | 50 | 40 |
| UEEEL0025 | Test and connect transformers* | 30 | 40 |
| UEEEL0039 | Design, install and verify compliance and functionality of general electrical installations* | 40 | 60 |
| UEEEL0047 | Identify, shut down and restart systems with alternate supplies* | 20 | 20 |
| UEERE0001 | Apply environmentally and sustainable procedures in the energy sector | 20 | 20 |
| UETDRRF004 | Perform rescue from a live LV panel* | 20 | 6 |
| Total weighting points and nominal hours - core units | 990 | 990 | |
| ELECTIVE UNITS OF COMPETENCY (complete 120 weighting points) Competencies marked * have pre-requisite competencies. | |||
| UEEAS0007 | Assemble, mount and connect control gear and switchgear* | 40 | 120 |
| UEEAS0009 | Mount and wire control panel equipment* | 40 | 60 |
| UEEIC0013 | Develop, enter and verify discrete control programs for programmable controllers* | 60 | 60 |
| UEEIC0041 | Solve problems in pressure measurement components and systems* | 40 | 40 |
| UEEIC0047 | Use instrumentation drawings, specifications, standards and equipment manuals* | 40 | 40 |
| Total weighting points and nominal hours - elective units | 120 - 220 | 140 - 320 | |
| Total weighting points and nominal hours for this qualification | 1110 - 1210 | 1130 - 1310 | |
* Indicates unit has pre-requisite requirements
Entry requirements
Admission criteria
To ensure you have the skills and support needed to study this course, all applicants are required to complete a Language, Literacy, Numeracy and Digital Literacy (LLND) evaluation.
To gain entry into UEE30820 Certificate III in Electrotechnology, candidates require:
- To be an Apprentice who has entered a Training Contract with their employer and Australian Apprenticeship Support Network NT.
- Hold an NT Apprentice Training Licence (Red Card)
Required Resources
Students are issued with unit workbooks and task sheets for the units undertaken. Whilst student workbooks are included in the course cost, students will be required to obtain the necessary textbooks and Australian standards below:
Textbooks and Australian Standards
- Electrical Fitter Technician
- Electrical Trade Principles, 6th Edition, by Steven Hanssen and Jeffrey Hampson. Cengage.
- Electrotechnology Practice, 6th Edition, by Steven Hanssen and Jeffrey Hampson. Cengage.
- AS/NZS 3000:2018 Electrical Installations - Wiring Rules-
- AS/NZS 3008:1.1.2017 Electrical Installations - Selection of Cables Part 1.1
- AS/NZS 3017:2022 Electrical Installations - Verification by Inspection and Testing
All of my lecturers were top notch former tradies with a solid grasp of what they were teaching. Whatever my issue was, they were always there for me. It was great.
Yron
CDU student

All of my lecturers were top notch former tradies with a solid grasp of what they were teaching. Whatever my issue was, they were always there for me. It was great.
Yron
CDU student

Course details
Accreditation
This is a current, nationally accredited qualification from the UEE Electrotechnology Training Package.
Location and study mode
Locations: Alice Springs, Casuarina,
Study Mode: On campus, workplace assessment
Note:
Delivery at individuals locations is subject to demand. Additional locations and/or study modes may become available pending sufficient demand.
Additional information
Contact details
Electrotechnology and Plumbing |
You make CDU
Together we are a positive force for change in our communities and the world.
You make CDU
Our students choose to study with us because we share the same vision – to make a positive change. Whatever your motivation is, we can guide you in the right direction.
You make CDU
Together we are a positive force for change in our communities and the world.
You make CDU
Our students choose to study with us because we share the same vision – to make a positive change. Whatever your motivation is, we can guide you in the right direction.
How to apply
How to apply for CDU TAFE
Admission requirements
Domestic or international student?
How to apply for international students
Applications to CDU must be submitted online.
The process is simple, all you need is a valid email address to create your online account.
Once you have started the application you will have the option of saving your application and resuming it at a later date.
There is no application fee when you apply online.
Find a CDU agent partner
Applicants may seek further information about international education in Australia from the Australian Government Department of Education and Training or from our overseas / external representatives.
To help with the process, we've compile a list of authorised representatives.
Not sure if you are a domestic or international student?
That's OK - it can be a little tricky to know the difference.
To help you out, we've put together a guide to answer any questions you might have.
Things like the difference between domestic and international students or the difference between course types like TAFE and undergraduate.



Share this course