Skip to main content
Start of main content
CDU VET student Zach
TAFE

AUR32120 Certificate III in Automotive Body Repair Technology

Not available to international students.

Update your personalisation settings to view information about this course.

This course is only available to Domestic students and your preference is currently set to International.

This course is only available to International students and your preference is currently set to Domestic.

Key details

Duration

3 year/s

This program is delivered over a period of 3 years full-time. The length of time to complete this qualification will depend on the location, study mode and/or units selected and will vary depending upon how long a student takes to reach the required competency level.

Intake

Locations

Casuarina
Not available to international students.

Course code

AUR32120

Overview



Offered to Apprentices only. This course is not available for online applications. Please contact the team for further information on how to apply.

This qualification reflects the role of individuals who perform a broad range of tasks when repairing and maintaining the body of cars, heavy vehicles and other vehicles in the automotive service and repair sector.

Career opportunities

Occupations relevant to this qualification in industry sectors such as Automotive Service and Repair include: 
>Vehicle Body Restoration Technician 
>Panelbeater 
>Heavy Vehicle Body and Chassis Repair Technician

Credit transfers and advanced standing

Skill recognition

Recognition of Prior Learning (RPL)

RPL is the acknowledgement of a person's skills and knowledge acquired through previous training, work or life experience, which may be used to grant status or credit in a subject regardless of how and where they were attained, including overseas.This can include skills from:

  • Previous study excluding courses at another VET/TAFE institution, but including courses at school or college, through adult education classes or training programs at work;
  • Work experience (including both work that is paid and unpaid); and/or
  • Life experience (for example leisure pursuits or voluntary work).

RPL is a form of assessment. It is used to determine whether a person has acquired, through formal or informal learning, the skills and experience consistent with the stated competency standards that comprise a qualification. RPL is not time referenced, so there are no parameters on how or when the skills are acquired. However, the skills that have been acquired through life experience etc., must be current and must match the elements and performance criteria contained in the individual unit.

Students seeking RPL need to indicate this on their enrolment form at the time of enrolment.

For further information please refer to the Applicant's Guide to the Recognition of Prior Learning or contact Student Central on 1800 061 963 (free call) or email Student.Central@cdu.edu.au.

Credit Transfer

Charles Darwin University as a Registered Training Organisation recognises the Australian Qualifications Framework qualifications and Statement of Attainments issued by any other Australian Registered Training Organisation.

Students are encouraged to submit any requests for credit from previous studies at the time of enrolment, to ensure they are not enrolling in units they may not need to undertake.

In order to apply for exemption/credit transfer from units completed at another training organisation, you will need to complete an Application for Exemption Form available from any campus, centre, or team, or a copy of the form can be obtained from the web.

Your completed Application for Exemption form together with attached documentary evidence (certified copy of Qualification/Statement of Attainment) to support your request for exemption/credit transfer should be submitted directly to the University either in person or by mail. Requests without documentary evidence will not be processed and will be returned to students. There are no fees attached to Credit Transfers.

Pathways

VET to Higher Education Pathway Mapping for completed Awards in the same field or discipline.

Further training pathways from this qualification include but are not limited to AUR40720 Certificate IV in Automotive Body Repair Technology.

Fees

2024 Fees

  Fee Type  2024 Course Fees
  NT Government supported*  $3,748.10 - $4,007.10
  Full Fee  $20,260.00 - $21,660.00

*This course is supported by the NT Government for eligible domestic students who are NT residents. A limited number of NT Government supported places are available, so secure your place now.

Fees shown are indicative and subject to change annually. Actual course fees may vary depending on the units chosen. International non-student visa-holders; study eligibility needs to be verified before enrolment. Fees may vary depending on the visa type.

For further clarification and information on fees, payment options, instalment plans, and refunds, contact CDU on 1800 061 963 or refer to TAFE Fees and Payments.

Fee exemptions

Exemptions apply to TAFE tuition fees for NTG supported courses only.

At the time of enrolment, students in these categories will be exempt from paying tuition fees:

  • Recipient of a Centrelink payment
  • Recipient of Department of Veterans Affairs benefits
  • Enrolled Secondary Students
  • Permanent residents with refugee or humanitarian status

Certified copy of the evidence must be provided at the time of enrolment.

If your course is delivered in a location that is listed on the NTG’s Location Categories for VET Funded Programs, with remote as the location category you may be eligible for the Remote 2 Location tuition fee exemption.

Delivery allowance for VET funded programs

CDU trades student

Why study trades at CDU?

Whether you're an apprentice, a trainee, or already working in the industry, our trades courses are for you.

Start your career or upskill in a variety of areas from construction and electrotechnology to plumbing and metal trades. Wherever your interest lies, you'll learn from experts with industry-standard technologies and tools so you can graduate workplace ready.

  • NT's largest training provider
  • Access to specialised trade training facilities
  • Recognition of prior learning so you can qualify faster
VET-palmerston-cookery-flipped

Why study at CDU?

Study with the Northern Territory's largest training provider and gain industry-ready skills and experience.

  • Access to first-class facilities
  • Recognition of prior learning accepted
  • Packages into higher education available for most courses
CDU trades student

Why study trades at CDU?

Whether you're an apprentice, a trainee, or already working in the industry, our trades courses are for you.

Start your career or upskill in a variety of areas from construction and electrotechnology to plumbing and metal trades. Wherever your interest lies, you'll learn from experts with industry-standard technologies and tools so you can graduate workplace ready.

  • NT's largest training provider
  • Access to specialised trade training facilities
  • Recognition of prior learning so you can qualify faster
VET-palmerston-cookery-flipped

Why study at CDU?

Study with the Northern Territory's largest training provider and gain industry-ready skills and experience.

  • Access to first-class facilities
  • Recognition of prior learning accepted
  • Packages into higher education available for most courses

What will I study?

To achieve AUR32120 Certificate III in Automotive Body Repair Technology a total of thirty one (31) units of competency must be completed comprising seventeen (17) Core and fourteen (14) Elective units as detailed in the packaging rules and listed below. The electives offered may vary between campuses.The total nominal hours for the sequence listed below is 1005 - 1075

Course structure

To achieve AUR32120 Certificate III in Automotive Body Repair Technology a total of thirty one (31) units of competency must be completed comprising seventeen (17) Core and fourteen (14) Elective units as detailed in the packaging rules and listed below. The electives offered may vary between campuses.

The total nominal hours for the sequence listed below is 1005 - 1075.
 

CodeModule/Unit of CompetencyHours
Core units of competency
AURAEA002Follow environmental and sustainability best practice in an automotive workplace25
AURAFA108Interpret and apply automotive repair instructions20
AURASA102Follow safe working practices in an automotive workplace20
AURETR042Remove, refit and operate electrical components following body repair activities20
AURETR125Test, charge and replace batteries and jump-start vehicles15
AURTTK102Use and maintain tools and equipment in an automotive workplace20
AURTTY001Repair vehicle chassis, frame and associated components80
AURVTN003Remove and store vehicle body components20
AURVTN022Repair vehicle body misalignment50
AURVTN104Remove, replace and align bolt-on vehicle body panels and components90
AURVTN116Repair vehicle body panels using filler35
AURVTN120Remove and replace major welded panels on vehicles50
AURVTN123Repair adhesive bonded structural damage on vehicles40
AURVTN132Inspect vehicle damage and determine repair procedures40
AURVTN135Apply original equipment manufacturer repair procedures during vehicle repairs20
AURVTW103Carry out advanced gas metal arc welding on vehicle body sections30
AURVTW105Carry out spot welding20
 Total nominal hours for core units595
Elective units of competency (Select 14)
Group A: Vehicle Body Repair (Must complete 8 units from Group A)
AURVTN005Remove and replace adhesive attached components on vehicles15
AURVTN017Repair vehicle thermoplastic body panels and components30
AURVTN029Set up and operate universal vehicle measuring systems20
AURVTN031Carry out vehicle sectional repairs80
AURVTN102Carry out non-structural vehicle panel repairs40
AURVTN113Carry out paint-less dent repairs on vehicle body panels40
AURVTN115Repair vehicle body panels using metal finishing35
AURVTN119Repair vehicle structural damage by riveting30
AURVTN128Identify and repair high strength steel vehicle components40
Group B: Vehicle Body Restoration
AURVTN025Repair corroded vehicle body panels and components60
General Elective Units
AURAFA104Resolve routine problems in an automotive workplace20
AURETH011Depower and reinitialise hybrid electric vehicles20
AURETH101Depower and reinitialise battery electric vehicles10
AURVTP005Apply rust prevention and sound deadening materials to vehicle body components20
AURETR149Apply knowledge of ADAS technology in vehicle pre-repair scans30
 Total nominal hours for elective units410 - 480
 Total nominal hours for the qualification1005 - 1075


 

Entry requirements

Admission criteria

To ensure you have the right skills and support to succeed in your course, a Language, Literacy and Numeracy (LL&N) evaluation helps identify any areas you may need additional support to help you achieve your goals.

To gain entry into AUR32120 Certificate III in Automotive Body Repair Technology candidates require:

  • To be an Apprentice who has entered a Training Contract with their employer and Australian Apprenticeship Support Network NT. 

Students will also need to wear work clothing suited to the automotive industry such as:

  • Steel cap boots
  • Safety glasses
  • Protective clothing
  • Welding helmet and clothing for welding units

All of my lecturers were top notch former tradies with a solid grasp of what they were teaching. Whatever my issue was, they were always there for me. It was great.

Yron

CDU student

Yron VET Trades

All of my lecturers were top notch former tradies with a solid grasp of what they were teaching. Whatever my issue was, they were always there for me. It was great.

Yron

CDU student

Yron VET Trades

Course details

Accreditation

This is a current, nationally accredited qualification from the AUR Automotive Retail, Service and Repair Training Package .

Employability skills

Employability Skills are embedded in the training and assessment of national training package qualifications. Information on the Employability Skills relevant to your qualification can be obtained by visiting this website and keying in the national code for the qualification: training.gov.au

Location and study mode

Delivery at all locations is subject to sufficient demand and resources.



Locations: Casuarina



Study Mode: On campus, workplace assessment



Subject to demand other locations and modes may become available throughout the year.

Additional information

Sector
TAFE
Industry groups
AUTOMOTIVE
Occupation types
Vehicle Body Builder
Area of study
Automotive

Contact details

Automotive, Transport and Civil
Location: Casuarina & Alice Springs Campuses
Phone: 08 8946 7506 (CAS) 08 8959 5363 (ASP) Student Central 1800 061 963
Email: vet.autocivil@cdu.edu.au

You make CDU

Together we are a positive force for change in our communities and the world.

You make CDU

Our students choose to study with us because we share the same vision – to make a positive change. Whatever your motivation is, we can guide you in the right direction.

You make CDU

Together we are a positive force for change in our communities and the world.

You make CDU

Our students choose to study with us because we share the same vision – to make a positive change. Whatever your motivation is, we can guide you in the right direction.

How to apply

How to apply for domestic students

CDU TAFE has several pathways for you to apply.

 

Visit How to apply for CDU TAFE courses for more information.

 

Admission requirements for domestic students

Before applying, you may want to check if you meet the admission requirements for studying with CDU.

 

CDU has many pathways to study, so don't worry if you don't meet the admission requirements right now. There is a study pathway to get you started on your journey.

Not sure if you are a domestic or international student?

That's OK - it can be a little tricky to know the difference.

 

To help you out, we've put together a guide to answer any questions you might have.

How to apply for international students

Applications to CDU must be submitted online.

 

The process is simple, all you need is a valid email address to create your online account.

 

Once you have started the application you will have the option of saving your application and resuming it at a later date.

 

There is no application fee when you apply online.

Find a CDU agent partner

Applicants may seek further information about international education in Australia from the Australian Government Department of Education and Training or from our overseas / external representatives.

 

To help with the process, we've compile a list of authorised representatives.

Not sure if you are a domestic or international student?

That's OK - it can be a little tricky to know the difference.

 

To help you out, we've put together a guide to answer any questions you might have.

 

Things like the difference between domestic and international students or the difference between course types like TAFE and undergraduate.

We are here to help

Submit an enquiry and our friendly team will be in touch.

You can unsubscribe at any time. See our privacy notice.
Back to top