Update your personalisation settings to view information about this course.
This course is only available to Domestic students and your preference is currently set to International.
This course is only available to International students and your preference is currently set to Domestic.
Key details
Duration
This course can typically be completed within 12 to 24 months.
* The actual duration may vary depending on where and how you study, the units you choose, and the time needed to demonstrate the required skills and knowledge.
Intake
Locations
Entry requirements
View full entry requirementsCourse code
Overview
Availability:Applications for 2027 are now open.
Online Application: You can apply for this course online.
Apprenticeships/Traineeships: This course can be undertaken as a traineeship. Visit TAFE Apprenticeships and Traineeships for more information.
This qualification reflects the role of individuals coordinating and maintaining the work health and safety (WHS) program in an organisation.
The qualification applies to supervisors and managers who apply a substantial knowledge base and well-developed skills in a wide variety of WHS contexts.
No licensing, legislative or certification requirements apply to this qualification at the time of publication.
| Delivery Details | |
| Location | Online |
| Duration | 12 months full-time 24 months part-time * Course duration may vary depending on the time required to achieve the required competencies. |
| Study Mode | Online * Information about study modes are available in the 2027 TAFE Student Guide. |
| Start Date | February 2, 2027 * This course has intakes at the start of each term. The delivery team will work with you to confirm your start date. |
| Attendance | Online sessions (optional and by arrangement with the lecturer) |
Career opportunities
After completing this course, you may be able to work in roles such as:
- Occupational Health and Safety Practitioner
- Work Health and Safety Manager
- Senior Work Health and Safety Officer
Credit transfers and advanced standing
Skill recognition
Recognition of Prior Learning (RPL)
Recognition of Prior Learning (RPL) recognises skills and knowledge gained through previous study, work experience, volunteering, or life experience. If your existing skills and knowledge meet the requirements of a unit of competency, you may be eligible to receive credit towards your qualification. If you would like to apply for RPL, please indicate this when completing your enrolment form. For more information, please contact CDU TAFE Student Services on 08 8946 7111, or email TAFE@cdu.edu.au.
Credit Transfer
If you have completed the same, or an equivalent, unit through another Australian Registered Training Organisation (RTO), you may be eligible for a credit transfer. To apply, submit a completed Application for Credit Transfer Form and supporting documentation. Applications are encouraged at the time of enrolment. There is no fee for credit transfer applications.
Pathways
VET to Higher Education Pathway Mapping for completed Awards in the same field or discipline.
If you completed a VET qualification at Certificate IV level or above and later enrol in a Bachelor degree in the same field, you may be eligible to receive credit towards your degree.
The table below shows the maximum credit available based on your completed qualification.
Completed Qualification | HE | VET | Bachelor Degree | Maximum Credit Available |
Certificate IV | * | 3 year Bachelor award | up to 40 credit points | |
Certificate IV | * | 4 year Bachelor award | up to 40 credit points | |
Diploma | * | * | 3 year Bachelor award | up to 80 credit points |
Diploma | * | * | 4 year Bachelor award | up to 80 credit points |
Advanced Diploma | * | * | 3 year Bachelor award | up to 160 credit points |
Advanced Diploma | * | * | 4 year Bachelor award | up to 160 credit points |
Associate Degree | * | 3 year Bachelor award | up to 160 credit points | |
Associate Degree | * | 4 year Bachelor award | up to 160 credit points | |
VET to Higher Education Pathway Mapping for completed Awards in the same field or discipline. | ||||
Professional Recognition |
Course Structure To achieve the BSB51319 Diploma of Work Health and Safety, a total of 10 units of competency must be completed comprising 5 core and 5 elective units as detailed in the packaging rules and listed below. The electives offered may vary between campuses. The total nominal hours for the sequence listed below is 460.
| ||||||||||||||||||||||||||||||||||||||||||||||||
If applicable select Timetables | ||||||||||||||||||||||||||||||||||||||||||||||||
Employability Skills |
2027 Fees
Eligible domestic students who are NT residents may be able to study this course with Northern Territory Government support. Places are limited, so apply early. Read the eligibility requirements to check if you-re eligible. |
Fees shown are indicative and subject to change annually. Actual course fees may vary depending on the units chosen. International non-student visa-holders; study eligibility needs to be verified before enrolment. Fees may vary depending on the visa type. For further clarification and information on fees, payment options, instalment plans, and refunds, contact CDU on 1800 061 963 or refer to TAFE Fees and Payments. | |
| Fee Exemptions | Exemptions apply to TAFE tuition fees for NTG supported courses only. At the time of enrolment, students in these categories will be exempt from paying tuition fees:
Certified copy of the evidence must be provided at the time of enrolment. If your course is delivered in a location that is listed on the NTG's Location Categories for VET Funded Programs, with remote as the location category you may be eligible for the Remote 2 Location tuition fee exemption. |
| VET Student Loans | Eligible students may access a VET Student Loan to pay for their course fees (up to capped amounts). 2026 VET Student Loan schedule |
General Description Availability:Applications for 2027 are now open. This qualification reflects the role of individuals coordinating and maintaining the work health and safety (WHS) program in an organisation. The qualification applies to supervisors and managers who apply a substantial knowledge base and well-developed skills in a wide variety of WHS contexts. No licensing, legislative or certification requirements apply to this qualification at the time of publication.
| ||||||||||||
Course Information Flyer(s) | ||||||||||||
Accreditation This is a current, nationally accredited qualification from the BSB Business Services Training Package. | ||||||||||||
Locations and Study Mode Locations: Alice Springs, Casuarina, Online | ||||||||||||
Entry Requirements Domestic | To ensure you have the skills and support needed to study this course, all applicants are required to complete a Language, Literacy, Numeracy and Digital Literacy (LLND) evaluation. To gain entry into BSB51319 Diploma of Work, Health and Safety, candidates require:
Required Resources Students can access assessments and learning resources at any time through CDU's online learning platform, Learnline. Before getting started, make sure your computer meets the required system requirements. | |||||||||||
Duration Estimated completion time: 1 year/s | |
This course can typically be completed within 12 to 24 months. * The actual duration may vary depending on where and how you study, the units you choose, and the time needed to demonstrate the required skills and knowledge. | |
Career Opportunities After completing this course, you may be able to work in roles such as:
|
Marketing Professional Recognition |
Marketing Course Description |
Marketing Career Opportunities |
- ABN 54 093 513 649
- Privacy Statement
- Copyright and Disclaimer
- CRICOS Provider No: 00300K (NT/VIC) | 03286A (NSW)
- RTO Provider No: 0373
Fees
2027 Fees
| Fee Type | 2027 Course Fees |
| NT Government supported* | $1,817.00 |
| Full Fee | $5,556.80 |
Eligible domestic students who are NT residents may be able to study this course with Northern Territory Government support. Places are limited, so apply early.
Read the eligibility requirements to check if you-re eligible.
Fees shown are indicative and subject to change annually. Actual course fees may vary depending on the units chosen. International non-student visa-holders; study eligibility needs to be verified before enrolment. Fees may vary depending on the visa type.
For further clarification and information on fees, payment options, instalment plans, and refunds, contact CDU on 1800 061 963 or refer to TAFE Fees and Payments.
Fee exemptions
Exemptions apply to TAFE tuition fees for NTG supported courses only.
At the time of enrolment, students in these categories will be exempt from paying tuition fees:
- Hold a current Centrelink Concession or Healthcare card
- Hold a Veteran's Healthcare card
- Enrolled Secondary Students
- Hold a permanent resident visa with Refugee or Humanitarian status
Certified copy of the evidence must be provided at the time of enrolment.
If your course is delivered in a location that is listed on the NTG's Location Categories for VET Funded Programs, with remote as the location category you may be eligible for the Remote 2 Location tuition fee exemption.
Delivery allowance for VET funded programs
VET student loans
Eligible students may access a VET Student Loan to pay for their course fees (up to capped amounts).
Determine your eligibility using the VET Student Loan Eligibility Tool on the Your Career website.
2026 VET Student Loan schedule
2027 VET Student Loan schedule
International VET Package
Course information flyer(s)
Why study at CDU?
Study with the Territory's largest training provider and gain industry-ready skills and experience. Whether you're a high school student or a working professional, we've got the courses and qualifications you want plus the support and flexibility you need to succeed.
- Learn from expert lecturers and industry professionals
- Access to first-class facilities
- Recognition of prior learning to qualify faster
Why study at CDU?
Study with the Northern Territory's largest training provider and gain industry-ready skills and experience.
- Access to first-class facilities
- Recognition of prior learning accepted
- Packages into higher education available for most courses
Why study at CDU?
Study with the Territory's largest training provider and gain industry-ready skills and experience. Whether you're a high school student or a working professional, we've got the courses and qualifications you want plus the support and flexibility you need to succeed.
- Learn from expert lecturers and industry professionals
- Access to first-class facilities
- Recognition of prior learning to qualify faster
Why study at CDU?
Study with the Northern Territory's largest training provider and gain industry-ready skills and experience.
- Access to first-class facilities
- Recognition of prior learning accepted
- Packages into higher education available for most courses
What will I study?
To achieve the BSB51319 Diploma of Work Health and Safety, a total of 10 units of competency must be completed comprising 5 core and 5 elective units as detailed in the packaging rules and listed below. The electives offered may vary between campuses.
Course structure
The total nominal hours for the sequence listed below is 460.
| Code | Module/Unit of Competency | Hours |
| CORE UNITS OF COMPETENCY | ||
| BSBWHS513 | Lead WHS risk management | 40 |
| BSBWHS515 | Lead initial response to and investigate WHS incidents | 50 |
| BSBWHS516 | Contribute to developing, implementing and maintaining an organisation's WHS management system | 50 |
| BSBWHS519 | Lead the development and use of WHS risk management tools | 40 |
| BSBWHS522 | Manage WHS consultation and participation processes | 40 |
| Total nominal hours for core units | 220 | |
| ELECTIVE UNITS OF COMPETENCY (Complete all 5) | ||
| BSBCMM411 | Make Presentations | 30 |
| BSBPEF502 | Develop and use emotional intelligence | 60 |
| BSBWHS517 | Contribute to managing a WHS information system | 50 |
| BSBWHS518 | Manage WHS hazards associated with maintenance and use of plant | 60 |
| BSBWHS520 | Manage implementation of emergency procedures | 40 |
| Total nominal hours for elective units | 240 | |
| Total nominal hours for the qualification | 460 | |
Entry requirements
Admission criteria
To ensure you have the skills and support needed to study this course, all applicants are required to complete a Language, Literacy, Numeracy and Digital Literacy (LLND) evaluation.
To gain entry into BSB51319 Diploma of Work, Health and Safety, candidates require:
- All BSB41419 Certificate IV in Work Health and Safety core units or equivalent competencies. Equivalent competencies are predecessors to the following units which have been mapped as equivalent.
- BSBWHS412 Assist with workplace compliance with WHS laws
- BSBWHS413 Contribute to implementation and maintenance of WHS consultation and participation processes
- BSBWHS414 Contribute to WHS risk management
- BSBWHS415 Contribute to implementing WHS management systems
- BSBWHS416 Contribute to workplace incident response
Required Resources
Students can access assessments and learning resources at any time through CDU's online learning platform, Learnline. Before getting started, make sure your computer meets the required system requirements.
The people-first approach to flexibility and supportive learning environment at CDU meant I could find a balance with study, work and family life.
Nikki
CDU student
I genuinely believe Darwin is the land of opportunities if you leverage your strengths, abilities and skills.
Ellie
CDU student
The people-first approach to flexibility and supportive learning environment at CDU meant I could find a balance with study, work and family life.
Nikki
CDU student
I genuinely believe Darwin is the land of opportunities if you leverage your strengths, abilities and skills.
Ellie
CDU student
Course details
Accreditation
This is a current, nationally accredited qualification from the BSB Business Services Training Package.
Location and study mode
Locations: Alice Springs, Casuarina, Online
Study Mode: On campus, online, both
Note:
Delivery at individuals locations is subject to demand. Additional locations and/or study modes may become available pending sufficient demand.
Additional information
Contact details
Culinary Arts and Hospitality |
You make CDU
Together we are a positive force for change in our communities and the world.
You make CDU
Our students choose to study with us because we share the same vision – to make a positive change. Whatever your motivation is, we can guide you in the right direction.
You make CDU
Together we are a positive force for change in our communities and the world.
You make CDU
Our students choose to study with us because we share the same vision – to make a positive change. Whatever your motivation is, we can guide you in the right direction.
How to apply
How to apply for CDU TAFE
Admission requirements
Domestic or international student?
How to apply for international students
Applications to CDU must be submitted online.
The process is simple, all you need is a valid email address to create your online account.
Once you have started the application you will have the option of saving your application and resuming it at a later date.
There is no application fee when you apply online.
Find a CDU agent partner
Applicants may seek further information about international education in Australia from the Australian Government Department of Education and Training or from our overseas / external representatives.
To help with the process, we've compile a list of authorised representatives.
Not sure if you are a domestic or international student?
That's OK - it can be a little tricky to know the difference.
To help you out, we've put together a guide to answer any questions you might have.
Things like the difference between domestic and international students or the difference between course types like TAFE and undergraduate.
Share this course