Update your personalisation settings to view information about this course.
This course is only available to Domestic students and your preference is currently set to International.
This course is only available to International students and your preference is currently set to Domestic.
Key details
Duration
This course can typically be completed within 1 to 2 years part-time.
* The actual duration may vary depending on where and how you study, the units you choose, and the time needed to demonstrate the required skills and knowledge.
Intake
Locations
Entry requirements
View full entry requirementsCourse code
Overview
Availability:Applications for 2027 are now open.
Online Application: Online applications are not available for this course.Please contact the team on the details below for further information on how to apply.
Apprenticeship/Traineeship: Currently not available as either an apprenticeship or traineeship.
This qualification reflects the role of an experienced plumbing service operator with advanced technical skills and/or responsibility for project design and supervision; or a hydraulic consultant responsible for designing hydraulic components and systems that meet client requirements and help in effective water management in domestic, commercial and industry contexts.
The plumbing industry strongly affirms that training and assessment leading to recognition of skills must be undertaken in a real or closely simulated workplace environment and this qualification requires all units of competency to be delivered and assessed in this context.
Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required before entering a construction work site. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement.
This is a licensed occupation in some jurisdictions. Licensing, legislative, regulatory and certification requirements may vary between states and territories. Relevant state and territory regulatory authorities should be consulted to confirm those requirements.
| Delivery Details | |
| Location | Casuarina Alice Springs |
| Duration | 1 to 2 years part-time * Course duration may vary depending on the time required to achieve the required competencies. |
| Study Mode | Face-to-face Online * Information about study modes are available in the 2027 TAFE Student Guide. |
| Start Date | January 18, 2027 - November 26, 2027 * You can enrol any time after the start date. The delivery team will confirm your start date and the next available unit. |
| Attendance | Monday - Friday 4:30pm to 8:30pm * Lecturer will provide more detailed information |
Career opportunities
After completing this course, you may be able to work in roles such as:
- Plumbing Contractor
- Hydraulic Designer
Credit transfers and advanced standing
Skill recognition
Recognition of Prior Learning (RPL)
Recognition of Prior Learning (RPL) recognises skills and knowledge gained through previous study, work experience, volunteering, or life experience. If your existing skills and knowledge meet the requirements of a unit of competency, you may be eligible to receive credit towards your qualification. If you would like to apply for RPL, please indicate this when completing your enrolment form. For more information, please contact CDU TAFE Student Services on 08 8946 7111, or email TAFE@cdu.edu.au.
Credit Transfer
If you have completed the same, or an equivalent, unit through another Australian Registered Training Organisation (RTO), you may be eligible for a credit transfer. To apply, submit a completed Application for Credit Transfer Form and supporting documentation. Applications are encouraged at the time of enrolment. There is no fee for credit transfer applications.
Pathways
VET to Higher Education Pathway Mapping for completed Awards in the same field or discipline.
If you completed a VET qualification at Certificate IV level or above and later enrol in a Bachelor degree in the same field, you may be eligible to receive credit towards your degree.
The table below shows the maximum credit available based on your completed qualification.
Completed Qualification | HE | VET | Bachelor Degree | Maximum Credit Available |
Certificate IV | * | 3 year Bachelor award | up to 40 credit points | |
Certificate IV | * | 4 year Bachelor award | up to 40 credit points | |
Diploma | * | * | 3 year Bachelor award | up to 80 credit points |
Diploma | * | * | 4 year Bachelor award | up to 80 credit points |
Advanced Diploma | * | * | 3 year Bachelor award | up to 160 credit points |
Advanced Diploma | * | * | 4 year Bachelor award | up to 160 credit points |
Associate Degree | * | 3 year Bachelor award | up to 160 credit points | |
Associate Degree | * | 4 year Bachelor award | up to 160 credit points | |
VET to Higher Education Pathway Mapping for completed Awards in the same field or discipline. | ||||
Successful completion of this course may provide a pathway to further study, including CPC40920 Certificate IV in Plumbing and Services - Hydraulic Services Design stream. | ||||
Professional Recognition |
Course Structure To achieve CPC40920 Certificate IV in Plumbing and Services (Operations) a total of 15units of competency must be completed comprising 10 core and 5 elective units as detailed in the packaging rules and listed below. The electives offered may vary between campuses. Please note:
The total nominal hours for the sequence listed below is 629 - 789.
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
If applicable select Timetables | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Employability Skills |
2027 Fees
Eligible domestic students who are NT residents may be able to study this course with Northern Territory Government support. Places are limited, so apply early. Read the eligibility requirements to check if you-re eligible. |
Fees shown are indicative and subject to change annually. Actual course fees may vary depending on the units chosen. International non-student visa-holders; study eligibility needs to be verified before enrolment. Fees may vary depending on the visa type. For further clarification and information on fees, payment options, instalment plans, and refunds, contact CDU on 1800 061 963 or refer to TAFE Fees and Payments. | |
| Fee Exemptions | Exemptions apply to TAFE tuition fees for NTG supported courses only. At the time of enrolment, students in these categories will be exempt from paying tuition fees:
Certified copy of the evidence must be provided at the time of enrolment. If your course is delivered in a location that is listed on the NTG's Location Categories for VET Funded Programs, with remote as the location category you may be eligible for the Remote 2 Location tuition fee exemption. |
General Description Availability:Applications for 2027 are now open. This qualification reflects the role of an experienced plumbing service operator with advanced technical skills and/or responsibility for project design and supervision; or a hydraulic consultant responsible for designing hydraulic components and systems that meet client requirements and help in effective water management in domestic, commercial and industry contexts. The plumbing industry strongly affirms that training and assessment leading to recognition of skills must be undertaken in a real or closely simulated workplace environment and this qualification requires all units of competency to be delivered and assessed in this context. Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required before entering a construction work site. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement. This is a licensed occupation in some jurisdictions. Licensing, legislative, regulatory and certification requirements may vary between states and territories. Relevant state and territory regulatory authorities should be consulted to confirm those requirements.
| ||||||||||||
Course Information Flyer(s) CPC40920 Certificate IV in Plumbing Services (Operations) - 2027 | ||||||||||||
Accreditation This is a current, nationally accredited qualification from the CPC Construction, Plumbing and Services Training Package. | ||||||||||||
Locations and Study Mode Locations: Alice Springs, Casuarina | ||||||||||||
Entry Requirements Domestic | To ensure you have the skills and support needed to study this course, all applicants are required to complete a Language, Literacy, Numeracy and Digital Literacy (LLND) evaluation. To gain entry into CPC40920 Certificate IV in Plumbing and Services, candidates require:
Required Resources Students can access assessments and learning resources at any time through CDU's online learning platform, Learnline. Before getting started, make sure your computer meets the required system requirements. Students are issued with digital and hard copy resources and will require access to a computer and the internet. Students are required to obtain the following textbooks and Australian Standards (as listed below):
| |||||||||||
Duration Estimated completion time: 1 year/s | |
This course can typically be completed within 1 to 2 years part-time. * The actual duration may vary depending on where and how you study, the units you choose, and the time needed to demonstrate the required skills and knowledge. | |
Career Opportunities After completing this course, you may be able to work in roles such as:
|
Marketing Professional Recognition |
Marketing Course Description |
Marketing Career Opportunities |
- ABN 54 093 513 649
- Privacy Statement
- Copyright and Disclaimer
- CRICOS Provider No: 00300K (NT/VIC) | 03286A (NSW)
- RTO Provider No: 0373
Successful completion of this course may provide a pathway to further study, including CPC40920 Certificate IV in Plumbing and Services - Hydraulic Services Design stream.
Fees
2027 Fees
| Fee Type | 2027 Course Fees |
| NT Government supported* | $2,484.55 - $3,116.55 |
| Full Fee | $11,504.41 - $14,430.81 |
Eligible domestic students who are NT residents may be able to study this course with Northern Territory Government support. Places are limited, so apply early.
Read the eligibility requirements to check if you-re eligible.
Fees shown are indicative and subject to change annually. Actual course fees may vary depending on the units chosen. International non-student visa-holders; study eligibility needs to be verified before enrolment. Fees may vary depending on the visa type.
For further clarification and information on fees, payment options, instalment plans, and refunds, contact CDU on 1800 061 963 or refer to TAFE Fees and Payments.
Fee exemptions
Exemptions apply to TAFE tuition fees for NTG supported courses only.
At the time of enrolment, students in these categories will be exempt from paying tuition fees:
- Hold a current Centrelink Concession or Healthcare card
- Hold a Veteran's Healthcare card
- Enrolled Secondary Students
- Hold a permanent resident visa with Refugee or Humanitarian status
Certified copy of the evidence must be provided at the time of enrolment.
If your course is delivered in a location that is listed on the NTG's Location Categories for VET Funded Programs, with remote as the location category you may be eligible for the Remote 2 Location tuition fee exemption.
International VET Package
Course information flyer(s)
Why study trades at CDU?
Whether you're an apprentice, a trainee, or already working in the industry, our trades courses are for you.
Start your career or upskill in a variety of areas from construction and electrotechnology to plumbing and metal trades. Wherever your interest lies, you'll learn from experts with industry-standard technologies and tools so you can graduate workplace ready.
- NT's largest training provider
- Access to specialised trade training facilities
- Recognition of prior learning so you can qualify faster
Why study at CDU?
Study with the Northern Territory's largest training provider and gain industry-ready skills and experience.
- Access to first-class facilities
- Recognition of prior learning accepted
- Packages into higher education available for most courses
Why study trades at CDU?
Whether you're an apprentice, a trainee, or already working in the industry, our trades courses are for you.
Start your career or upskill in a variety of areas from construction and electrotechnology to plumbing and metal trades. Wherever your interest lies, you'll learn from experts with industry-standard technologies and tools so you can graduate workplace ready.
- NT's largest training provider
- Access to specialised trade training facilities
- Recognition of prior learning so you can qualify faster
Why study at CDU?
Study with the Northern Territory's largest training provider and gain industry-ready skills and experience.
- Access to first-class facilities
- Recognition of prior learning accepted
- Packages into higher education available for most courses
What will I study?
To achieve CPC40920 Certificate IV in Plumbing and Services (Operations) a total of 15units of competency must be completed comprising 10 core and 5 elective units as detailed in the packaging rules and listed below. The electives offered may vary between campuses.
Course structure
Please note:
- If you chose the non-gas stream, you will be assessed in CPCPRF4011 Design and size roof drainage systems
- If you choose the gas stream, you will be assessed in CPCPGS4022 Service Type A gas appliances
The total nominal hours for the sequence listed below is 629 - 789.
| Code | Module/Unit of Competency | Hours |
| Core units of competency | ||
| BSBESB402 | Establish legal and risk management requirements of new business ventures | 60 |
| CPCCBC4012 | Read and interpret plans and specifications | 30 |
| CPCPCM4011 | Carry out work-based risk control processes | 24 |
| CPCPCM4012 | Estimate and cost work | 40 |
| CPCPCM4015 | Access and interpret regulatory requirements for the plumbing and services industry | 15 |
| CPCPDR4011 | Design and size sanitary drainage systems | 40 |
| CPCPDR4012 | Design and size stormwater drainage systems | 45 |
| CPCPGS4011 | Design and size consumer gas installations | 60 |
| CPCPSN4011 | Design and size sanitary plumbing systems | 50 |
| CPCPWT4011 | Design and size heated and cold-water services and systems | 80 |
| Total nominal hours for core units | 444 | |
| Elective units of competency (Select 5 from below) | ||
| Group A | ||
| CPCPDR4013 | Design and size domestic treatment plant disposal systems | 35 |
| CPCPRF4011 | Design and size roof drainage systems | 60 |
| Group B | ||
| CPCPCM2043 | Carry out WHS requirements | 50 |
| CPCPGS4022 | Service Type A gas appliances Pre-requisites: CPCPCM2043 and CPCPGS3053 | 180 |
| CPCPWT4022 | Commission and maintain backflow prevention devices Pre-requisites: CPCPCM2043 and CPCPWT3027 | 20 |
| CPCPWT4023 | Commission and maintain hot and heated water temperature control devices Pre-requisites: CPCPCM2043 and CPCPWT3022 | 20 |
| Total nominal hours for elective units | 185 - 345 | |
| Total nominal hours for the qualification | 629 - 789 | |
Entry requirements
Admission criteria
To ensure you have the skills and support needed to study this course, all applicants are required to complete a Language, Literacy, Numeracy and Digital Literacy (LLND) evaluation.
To gain entry into CPC40920 Certificate IV in Plumbing and Services, candidates require:
- Completion of a relevant trade qualification Certificate III in Plumbing such as CPC32420 Certificate III in Plumbing.
- An appropriate level of language, literacy and numeracy
- Confident computer literacy
- Achievement of CPCWHS1001 Prepare to work safely in the construction industry.
Required Resources
Students can access assessments and learning resources at any time through CDU's online learning platform, Learnline. Before getting started, make sure your computer meets the required system requirements.
Students are issued with digital and hard copy resources and will require access to a computer and the internet.
Students are required to obtain the following textbooks and Australian Standards (as listed below):
- AS 3500:2025 Parts 1, 2, 3, and IV
- NCC Vol 1, 2, and 3
- ASNZ 5601 Parts 1 and 2
All of my lecturers were top notch former tradies with a solid grasp of what they were teaching. Whatever my issue was, they were always there for me. It was great.
Yron
CDU student
All of my lecturers were top notch former tradies with a solid grasp of what they were teaching. Whatever my issue was, they were always there for me. It was great.
Yron
CDU student
Course details
Accreditation
This is a current, nationally accredited qualification from the CPC Construction, Plumbing and Services Training Package.
Location and study mode
Locations: Alice Springs, Casuarina
Study Mode: On campus, online, both
Note:
Delivery at individuals locations is subject to demand. Additional locations and/or study modes may become available pending sufficient demand.
Additional information
Contact details
Electrotechnology and Plumbing |
You make CDU
Together we are a positive force for change in our communities and the world.
You make CDU
Our students choose to study with us because we share the same vision – to make a positive change. Whatever your motivation is, we can guide you in the right direction.
You make CDU
Together we are a positive force for change in our communities and the world.
You make CDU
Our students choose to study with us because we share the same vision – to make a positive change. Whatever your motivation is, we can guide you in the right direction.
How to apply
How to apply for CDU TAFE
Admission requirements
Domestic or international student?
How to apply for international students
Applications to CDU must be submitted online.
The process is simple, all you need is a valid email address to create your online account.
Once you have started the application you will have the option of saving your application and resuming it at a later date.
There is no application fee when you apply online.
Find a CDU agent partner
Applicants may seek further information about international education in Australia from the Australian Government Department of Education and Training or from our overseas / external representatives.
To help with the process, we've compile a list of authorised representatives.
Not sure if you are a domestic or international student?
That's OK - it can be a little tricky to know the difference.
To help you out, we've put together a guide to answer any questions you might have.
Things like the difference between domestic and international students or the difference between course types like TAFE and undergraduate.
Share this course